RTK-PLUS™ Table Extension Kit
Model: RemoteTableKit™ Plus
- Extends power, control, USB, audio, video and Ethernet (PoE) over a standard CAT5e/CAT6 cable up to 100m.
- Flexibility to power the modules from either the transmitter or receiver.
- Table PoE support for Cisco Touch 10 Controller
- Supports up to 3 Cisco Table Microphones
- Bi-Directional Line-Level Audio Support
The RTK-PLUS™ table extension kits provide a reliable “transparent” link between the table devices and Cisco codec. Codec specific microphone cables and power supply are included in the kit. The RTK-PLUS™ supports the Cisco Codec Plus, Codec EQ, Room Bar, Room Bar Pro and Room 55. The RTK-PLUS™ provides HDMI for content, Touch 10/Navigator Ethernet and power, Audio I/O, USB and up to 3 Cisco Microphones (Table Mic 20 and Table-J Mic) at a distance of up to 100 meters on CAT5e/CAT6.
Sound Control Technologies (SCT) Table Extension Kits are designed to bring you the inputs from the Cisco codec backplane right to the table! The RTK-PLUS™ and RTK-PRO™ kits provides a reliable transparent link between the table devices and the connected Cisco codec. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.
- Extends power, control, USB, audio, video and Ethernet (PoE) over a standard CAT5e/CAT6 cable up to 100m.
- Flexibility to power the modules from either the transmitter or receiver.
- Table PoE support for Cisco Touch 10 Controller
- Supports up to 3 Cisco Table Microphones
- Bi-Directional Line-Level Audio Support
- Simple Plug & Play installation, no programming required.
- All hardware-specific codec connection cables are included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
- Integrator only required to provide a CAT5e/CAT6 SCTLink™ Cable.
- Inclusive of RemoteTableKit™ Modules, Kit Cables and Power Supply
- RTK-TX Module
- RTK-RX Module
- RCC-H001-1.0M HDMI Cable
- RCC-H016-1.0M UTP Cable
- RCC-C018-1.0M TRRS to TRRS Cables
- WPS-12 Power Supply
- Spec Sheet available - Yes
- Microphone Support (RTK-PLUS™): Up to 3 Cisco Microphone 20 or Microphone Table-J Microphones; Cisco RoomKit supports up to 2 microphones
- Microphone Support (RTK-PRO™): Up to 3 Cisco Microphone 60 or Microphone Table-E microphones
- Video Format: HDMI, up to 4K 25/30 4:4:4. HDCP up to v2.2
- PoE Support (RTK-TX™): Passive PoE, 48VDC, 7W, Class-2, Mode B per IEEE 802.3af
- Audio In/Out (RTK-TX™): 3.5mm TRS Jacks, Stereo Line Level Unbalanced
- Ethernet Connectivity (RTK-TX™): Single 10/100 Port with PoE
- Ethernet Connectivity (RTK-RX™): 10/100 Two Port Layer 2 Ethernet Switch
- USB Link: USB 2.0 Uni-Directional USB-A (x2) and Micro-B: Receiver to Transmitter or Transmitter to Receiver
- USB Tier Usage: 1 tier (hub) per linked set
- USB-A Output Power (each): 5VDC at 500mA continuous. Overload/short-circuit 1.25A max
- SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
- Wiring Termination: Standard T568A or T568B 10m Minimum - 100m Maximum Length
- Power Consumption: A linked stand-alone kit will consume 9W, plus the power consumption of attached USB and PoE Devices
- RTK-TX™ Transmitter Module: Dimension: H: 1.39 x W: 10.224 x D: 4.51 inch; Weight: 1.1 lbs/498g
- RTK-RX™ Receiver Module: Dimension: H: 1.39 x W: 10.224 x D: 4.51 inch; Weight: 1.1 lbs/498g
- WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/