top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
RCU2S-C30™ for Panasonic
Model: RCU2S-C30
- Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
- Simple Plug and Play installation, no programming required.
- Allows pass-through of manufacturer firmware updates from codec to camera.
- All hardware-specific camera and codec connection cables included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
Product Info
Tech Specs
Documents
Sound Control Technologies (SCT) USB camera extension kits are designed to streamline the integration of USB PTZ cameras requiring USB and RS232 Visca control. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.
Supported Cameras:
Panasonic AW-HE20
Panasonic AW-UE20
Panasonic AW-UE40
Panasonic AW-UE50
- Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
- Simple Plug and Play installation, no programming required.
- Allows pass-through of manufacturer firmware updates from codec to camera.
- All hardware-specific camera and codec connection cables included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
- Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
- Base Kit: Inclusive of RCU2S Modules, Kit Cables and Power Supply
- RCU2S-CE Camera Interface Module
- RCU2S-HE Codec/Head-End Interface Module
- RCC-C029-0.3M RJ11 (RCU2S-CE) to DC Plug
- RCC-M005-0.3M USB-A (RCU2S-CE™) to USB-C
- RCC-M004-1.0M USB-B (RCU2S-HE™) to USB-A
- WPS-12 Power Supply
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Power Consumption: A linked kit will consume 4.5W, plus the power consumption of the attached camera
- Video Format: USB Video typically up to 1080p30/720p60
- Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
- Color: Black
- Warranty (Length/Type): 3 Years
- Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
- RCU2S-CE™ Camera End Module: Dimension: H: 0.789 x W: 2.264 x D: 3.725 inch; Weight: 0.2 lbs/90g
- RCU2S-HE™ Head End Module: Dimension: H: 1.448 x W: 3.814 x D: 3.578; Weight: 0.4 lbs/181g
- WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
- VISCA Control Loop: Daisy Chain Configuration with up to 7 cameras
- SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
- USB Tier Usage: 1 tier (hub) per linked set
- VISCA Loop Connector (RCU2S-CE™): RJ11 Female for Data or Power (12V or 5V Camera Power up to 3A)
- VISCA Loop Connector (RCU2S-HE™): 8-Pin Mini DIN Female
- Power/Control/IR Connector (RCU2S-CE™): RJ45 Female
- Control/IR Connector (RCU2S-HE™): 9-Pin D-Sub Male
- USB Connector (RCU2S-CE™): USB-A for Data and 5V Camera Power up to 1.2A
- USB Connector (RCU2S-HE™): USB-B 2.0 for Host Connection
- Wiring Termination: Standard T568A or T568B 100m Maximum Length (No Minimum Length)
Kit
570839 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Sound Control Technologies
Model: RCU2S-C30
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page