top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
RC7-1BH for the 1Beyond Hawk
Model: RC7-1BH
- Extends power to cameras and assembly (no factory camera PSU required), PTZ control and video, and dual channel audio over a CAT6 cable between 10m-100m.
- Integrated 1x2 HDMI Distribution Amplifier
- Simple Plug and Play installation, no programming required.
- Allows pass-through of manufacturer firmware updates from codec to camera.
- All hardware-specific camera and codec connection cables included.
Product Info
Tech Specs
Documents
The RC7-1BH™ camera extension kit has been designed to deliver a transparent, reliable, and cost-effective link between the head-end and the 1Beyond Hawk. A 2-RU RC-RKM™ rack shelf is included for the RC7-HE™ module at the head-end.
Sound Control Technologies (SCT) Camera Extension Kits are designed to streamline the installation of digital video PTZ camera systems. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.
- Extends power to cameras and assembly (no factory camera PSU required), PTZ control and video, and dual channel audio over a CAT6 cable between 10m-100m.
- Integrated 1x2 HDMI Distribution Amplifier
- Simple Plug and Play installation, no programming required.
- Allows pass-through of manufacturer firmware updates from codec to camera.
- All hardware-specific camera and codec connection cables included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
- Integrator only required to provide a CAT6 SCTLink™ Cable.
- Base Kit: Inclusive of RC7 Modules, Kit Cables, Power Supply and Rack Shelf
- RC7-CE Camera Module
- RC7-HE Head-End/Codec Module
- RCC-C005-0.4M RS232 Cable
- RCC-C001-0.3M HDMI Cable
- RCC-H001-1.0M HDMI Cable
- WPS-48 Power Supply
- RC-RKM™ Rack Shelf
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Certifications: UL, CE, FCC, CCC, TÜV, RCM and RoHS2
- Color: Black
- Warranty (Length/Type): 3 Years
- Video Format: HDMI, up to 1920x1080p at 60Hz, dual buffered outputs with HDCP support
- HDMI Connector (RC7-CE™): HDMI Input
- HDMI Connector (RC7-HE™): 1x2 DA HDMI Outputs
- RS232 Connector (RC7-HE™): 9-Pin D-Sub Male
- Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
- Ethernet Connectivity (RC7-CE™): Single 10/100 Port
- Ethernet Connectivity (RC7-HE™): 10/100 Two Port Layer 2 Ethernet Switch
- Power Out (RC7-CE™): 12VDC 6.5mm x 3mm Barrel to power the camera/camera assembly
- SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
- Wiring Termination Standard: T568A or T568B 10m Minimum - 100m Maximum Length
- Power Consumption: A linked kit will consume 16W, plus the power consumption of attached camera
- RC7-CE™ Camera End Module: Dimension:H 1.6 x W 6.48 x D 4.55 inch, Weight: 0.9 lbs/408g
- RC7-HE™ Head End Module: Dimension: H 1.6 x W 8.65 x D 4.55 inch, Weight: 1 lbs/453g
- WPS-48™ Power Supply (Included): Dimension: H 1 x W 2.98 x D 5.96 inch; Weight: 0.84 lbs/380g; Input: 100 to 240VAC, 50Hz-60Hz, 1.8A Max, Output: 48VDC, 2.5A Max; Output Connector: 3 Pin-Din
- Cameras: Panasonic AW-UE150, Poly Director II, Sony BRC-H800 and Sony X1000
- Codecs: Poly RPG310/500/700/7500 and generic codecs
Kit
458054 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Sound Control Technologies
Model: RC7-1BH
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page