top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Matching Transformer for Microphones with XLR-type Connector
Series: Shure
Model: A96F
- Connects microphones with an XLR-type connector to the 3.5mm (1/8 inch)
- Increases the signal level from the microphone
- Provides balanced input, and prevents distortion due to the DC bias
Product Info
Tech Specs
Documents
A96F transformer connects microphones with an XLR-type connector to the 3.5mm inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the DC bias voltage typically found in camcorder microphone inputs. The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. It features a female XLR connector on the microphone end and .6 meter (2 ft) cable with 3.5 mm phono plug on the recorder end.
- Connects microphones with an XLR-type connector to the 3.5mm (1/8 inch)
- Increases the signal level from the microphone
- Provides balanced input, and prevents distortion due to the DC bias
- Warranty - Yes
- Depth: 3.50 in
- Warranty (Length/Type): Limited
- Frequency Response: 20 to 20,000 Hz
- Low Impedance: 600 ohms (supplied) or 150 ohms
- Medium Impedance: 2,500 ohms
- Dc Resistance Low Impedance: 600 ohms winding: 56 ohms, 150 ohms winding: 28 ohms
- DC Resistance Medium Impedance: Open Circuit
- Case: Full magnetic shield, steel with gray enamel finish
User guide for Line Matching Transformer
36 kb
- Instructions
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Shure Incorporated
Model: A96F
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page