top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Studio Quality Mic Preamp with phantom - 3 Line Outputs
Series:
Model: STM-LDA3
- Studio-Quality Microphone Preamplification
- Three Distributed Line-Level Outputs
- Low-Noise and Low-Distortion Performance
- Selectable Filtered Phantom Voltage
- Adjustable Gain up to 60 dB
Product Info
Tech Specs
Related Products
Documents
Accessories
The STM-LDA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 k ohm balanced input accepts a wide variety of microphone input levels without loading professional low-impedance microphones. A multi-turn gain trimmer allows precise output level adjustment. The output signal is available on three separate balanced line level outputs. Each output may be connected balanced or unbalanced. RDL's exclusive low-noise discrete preamplifier circuitry produces studio-quality low-noise performance in an economical preamplifier. Dynamic or condenser microphones may be used with the STM-LDA3. Standard 24V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDL's unique dual-LED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below a +4 dBu output. The intensity of the green LED progresses from minimum to full intensity at +4 dBu. The adjacent red LED illuminates when the operating level exceeds +4. This makes the STM-LDA3 easy to set up without any external test equipment, and operating levels may be monitored at the module.
- Studio-Quality Microphone Preamplification
- Three Distributed Line-Level Outputs
- Low-Noise and Low-Distortion Performance
- Selectable Filtered Phantom Voltage
- Adjustable Gain up to 60 dB
- RDL's® Exclusive Dual-LED VU Metering
- Versatility of STICK-ON® Compactness
- Preamplifier Signal Type - Audio
- Noise:
< -70 dB (below +4 dBu @ 60 dB gain - wideband)
< -80 dB (below +4 dBu @ 50 dB gain - wideband) - Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Inputs: 1.2 Kilo Ohms balanced
- Outputs (3): +4 dBu 150 ohm balanced
- Gain: 40 to 60 dB (25 turn adjustable)
- Frequency Response: 30 to 20000 Hz (+/- 0.2 dB)
- THD+N: < 0.1 %
- IMD: < 0.1 %
- Equivalent Input Noise: < -130 dB (gain + residual noise below +4 dBu)
- Headroom: > 20 dB (above +4 dBu)
- CMRR: > 60 dB (100 Hz to 5 kHz)
- Power Requirement: 24 to 33 Vdc
EZ-MPA1
- Microphone Preamplifier - Stereo Output with Compressors
EZ-MPA2
- Dual Microphone Preamplifier - Stereo Output with Compressors
FP-MP1
- Studio Quality Mic Preamp w/ Phantom - Terminals & XLR
HR-MP2
- Dual Microphone Preamplifier
HR-MP2A
- Dual Microphone Preamplifier
STM-DA3
- Mic Level Distribution Amplifier - 1x3
STS-RF1
- Shielded Chassis for STICK-ON Module
Datasheet for Studio Quality Mic Preamp w/ phantom
947622 kb
- Other
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Radio Design Labs
Model: STM-LDA3
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page