top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Voice-Over / Paging Module - Manual
Series:
Model: ST-VP1
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjunction with RDL's® ST-ACR products.
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
- Soft Audio Switching
- Polar/Pickup Pattern - Other
- Microphone Type - Other
- Noise: < -85 dB (below +4 dBu output)
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 10 Hz
- Minimum Frequency Response (Bandwidth): 0.01 kHz
- Frequency Response(Music): 10 to 20000 Hz (+/- 0.25 dB)
- THD+N: < 0.01 %
- Attenuation when muted: > 65 dB
- Frequency Response(Voice): 30 Hz to 20 kHz (+/- 0.25 dB)
- THD+N: < 0.01 %
- Attenuation when muted: > 80 dB
- Input Level: 4 dBu Balanced (may be connected unbalanced)
- Output Level: +4 dBu balanced (may be connected unbalanced)
- Gain (either input): Unity (balanced input/output)
- Headroom: > 18 dB (above +4 dBu)
- Fade Rate Adj.: 0.3 to 1.3 seconds
- Fade Depth (music input): Adj. 3 to 40 dB
- Power Requirement: 24 to 33 VDC @ 45 mA
Datasheet for Voice-Over / Paging Module - Manual
874751 kb
- Other
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Suggested Products
by
Biamp
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Radio Design Labs
Model: ST-VP1
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page