top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Muting Monitor Amplifier - 2 Watt
Series:
Model: ST-MA2
- Single-Speaker Monitor Amplifier
- Conferencing Monitor Amp
- Monitor Amp with Muting and Externally Actuated Attenuation Steps
- Fast, Silent Audio Switching
- Multiple Control Inputs
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output. This module may be used in conjunction with other RDL® modules to configure automatic mixing systems or may be used alone as a single-speaker monitor amplifier. The ST-MA2 is typically used to drive a small tabletop or overhead monitor speaker in a conference room, boardroom, courtroom, public forum panel or similar installation. The ST-MA2 is ideally suited for use in automatic mixing systems due to its control inputs. The line-level input may be wired balanced or unbalanced. The audio output will drive standard speakers from 4 to 45 ohm. Normal gain is preset by means of a trimmer on the module. For tabletop installations, use the ST-MA2 with the WDG1 and RU-SP1.
- Single-Speaker Monitor Amplifier
- Conferencing Monitor Amp
- Monitor Amp with Muting and Externally Actuated Attenuation Steps
- Fast, Silent Audio Switching
- Multiple Control Inputs
- Adjustable Gain
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Number of Inputs: 1
- Number of Outputs: 1
- Maximum Frequency Response (Bandwidth): 14 kHz
- Maximum Frequency Response (Bandwidth): 14000 Hz
- Minimum Frequency Response (Bandwidth): 45 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Input Level: -10 dBV minimum for 2 Watts RMS output
- Output Impedance: 8 ohm (will drive 4 ohm loads)
- Output Power: 1.75 Watts RMS Continuous; 2 Watts RMS max.
- THD+N: < 0.5 %
- CMRR: > 60 dB (50 Hz to 120 Hz)
- Residual Noise: < -80 dB (below 2 Watts RMS)
- Switching Time: < 50 us
- Attenuation (Muted):
> 90 dB (1 kHz),
> 85 dB (300 Hz to 3 kHz)
> 75 dB (20 Hz to 20 kHz) - Selectable Attenuation: 3 or 6 dB
- Power Requirement: 24 to 33 Vdc @ 200 mA
Datasheet for Muting Monitor Amplifier - 2 Watt
619064 kb
- Other
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Radio Design Labs
Model: ST-MA2
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page