top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Product Info
Tech Specs
Related Products
The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two PS-24U2 Power Supplies. There is adequate space remaining for associated STICK-ON and TX series modules. If two FP-PA20 type amplifiers are not used, multiple STICK-ON, FLAT-PAK and TX series modules may be mounted. Examples of typical tray-mounted modules may include STICK-ON series power amplifiers. Headphone amplifiers, VCA modules, line amplifiers, video amplifiers or distribution amplifiers may also be mounted.
- Related Mount Product Types - Other
- Depth: 10 in
- Height: 2.50 in
- Width: 11.20 in
- Shipping Weight: 3.80 lbs
FP-ALC1
- Automatic Level Control - Mono - Terminals
FP-ALC2
- Automatic Level Control - Stereo - Phono Jacks
FP-AVDA4
- Stereo Audio/Video Distributor-1x4, Phono Jacks
FP-BUC2
- Balanced to Unbalanced Converter-2 channel
FP-CH8
- Chime Generator
FP-DFC2
- Digital Audio Format Converter (24/192)
FP-MP1
- Studio Quality Mic Preamp w/ Phantom - Terminals & XLR
FP-MPA2
- Dual Mic Phantom Adapter 12, 24, 48 V - XLR
FP-MR2
- FP-MR2 Message Repeater
FP-MX4
- 4 Mic or Line Input Mixer - Mic and Line Out
FP-PA20
- Power Amplifier - 20 W 8 ohms
FP-PA20A
- 20 W Mono Audio Amplifier, 70 V or 100 V
FP-PA20B
- 20 W Mono Audio Amplifier 25 V
FP-PEQ3
- 3 Band Parametric Equalizer, Terminal blocks and RCA jacks
FP-SPR1
- SPDIF Repeater / Amplifier
FP-UBC2
- Unbalanced to Balanced Converter - 2 Channel
FP-UBC6
- Unbalanced to Balanced Converter - 6 Channel
FP-VDA4
- NTSC/PAL Video Distribution Amp - 1x4 - BNC
ST-CL2
- Line Level Compressor/Limiter
ST-CX2
- Two Band Active Line-level Crossover
ST-CX2S
- Subwoofer Crossover Filter
ST-GCA3
- Gain Control Amplifier - Line Level
ST-HP3
- 300 Hz and 500 Hz High Pass Filter
TX-10B
- Bridging Input Transformer
TX-1A
- Adjustable Balanced to Unbalanced Transformer.
TX-1W
- Music on Hold Amplifier - 1 Watt
TX-70A
- Unbalanced Line Output Speaker Level Input Interface
TX-8i
- Headphone Isolation Transformer
TX-A2
- Audio Converter - Balanced to Unbalanced
TX-A2D
- Dual Audio Converter - Balanced to Unbalanced
TX-AFC1F
- Balanced to Unbalanced Audio Transformer
TX-AFC1M
- Unbalanced to Balanced Audio Transformer RCA, XLR
TX-AT1
- 600 ohm 1:1 Audio Isolation Transformer
TX-AT1S
- Audio Isolation Transformer with Suppression
TX-AVX
- Automatic Video Switch, BNC
TX-J2
- Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output
TX-LC2
- Unbalanced to Balanced Line Combiner
TX-LM2
- Line Level to Mic Level Transformer
TX-MVX
- 2x1 Manual Rmt Controlled Video Switch, BNC
TX-MX2R
- Audio Mixer / Distribution Amplifier
TX-PCR1
- Paging Controlled Relay
TX-PSD1
- Paging Sound Detector
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
TX-TPS6A
- Passive Single-Pair Sender, Twisted Pair Format-A
TX-VCR
- Video Controlled Relay - BNC
TX-VLA1
- Video Line Amplifier - Adjustable Gain and EQ
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Radio Design Labs
Model: PM-1T
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page