top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
12 Vdc to 24 Vdc Converter
Series:
Model: FP-DCC1
- 24 Vdc Power from 12 Vdc Source
- Mobile Powering of 24 Vdc Modules
- 24 Vdc Ground-Referenced Power Output
- Separate High-Current and Low-Noise Outputs
- Terminal Block and DC Jack Outputs
Product Info
Tech Specs
The FP-DCC1 is the ideal choice in many applications where audio or video modules need to be powered from a 12 Vdc source. Ground-referenced RDL modules may be operated from one of the FP-DCC1's two outputs. One is a high current output providing 400 mA @ 24 Vdc intended to power multiple modules (see RDL ST-PD5 Power Supply Distributor for multiple module installations) or RDL audio power amplifiers (such as ST-PA2 or ST-PA6). A second low noise output is heavily filtered and provides 50 mA @ 24 Vdc specifically to power microphone level high gain modules, such as microphone preamplifiers. Both outputs may be used simultaneously.
The FP-DCC1 outputs are regulated to provide 24 Vdc for input voltages normally encountered in 12 Vdc battery circuits. If voltage in excess of 15 Vdc (possible if a vehicle's regulator should fail) is connected to the FP-DCC1 input, the module protects itself by shutting down its internal circuitry and illuminating the INPUT OVERVOLTAGE LED. The FP-DCC1 input and outputs are protected against excessive currents and reverse voltages. The FP-DCC1 is not intended to power floating (bipolar) modules.
The FP-DCC1 outputs are regulated to provide 24 Vdc for input voltages normally encountered in 12 Vdc battery circuits. If voltage in excess of 15 Vdc (possible if a vehicle's regulator should fail) is connected to the FP-DCC1 input, the module protects itself by shutting down its internal circuitry and illuminating the INPUT OVERVOLTAGE LED. The FP-DCC1 input and outputs are protected against excessive currents and reverse voltages. The FP-DCC1 is not intended to power floating (bipolar) modules.
- 24 Vdc Power from 12 Vdc Source
- Mobile Powering of 24 Vdc Modules
- 24 Vdc Ground-Referenced Power Output
- Separate High-Current and Low-Noise Outputs
- Terminal Block and DC Jack Outputs
- Ultra-Compact All Metal Construction
- Convenience of RDL® FLAT-PAKs™
- Outputs (3): One 24 Vdc regulated @ 400 mA (detachable terminal block) One 24 Vdc regulated @ 400 mA (dc power jack) (Note: The combined load for both the above outputs is 400 mA) One 24 Vdc regulated @ 50 mA filtered (detachable terminal block)
- Fuses (2): One 2 A Automotive blade style miniature fuse (Input), One 1 A Automotive blade style miniature fuse (Output)
- Power Requirement: GROUND-REFERENCED, 11-14 Vdc @ 1 A, (detachable terminal block)
- Height: 1.25 in. 3.18 cm
- Width: 3.25 in. 8.26 cm
- overall length: 6.54 in. 16.61 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 6.54 in
- Height: 1.25 in
- Width: 3.25 in
- Shipping Weight: 0.82 lbs
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Radio Design Labs
Model: FP-DCC1
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page