3500 Lumens WXGA 1-chip DLP Solid Shine Laser Fixed Installation Projector

Model: PT-RW430U

Digital link connectivity
20,000:1 contrast ratio
LED/Laser light source enables up to 20,000 hours of maintenance free usage
System expandability with portrait mode installation capability and edge blending

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PT-RW430 is a 3500 Lumens WXGA 1-chip DLP solid shine laser fixed installation projector ideal for use in education, corporate or digital signage applications.

Digital link connectivity
20,000:1 contrast ratio
LED/Laser light source enables up to 20,000 hours of maintenance free usage
System expandability with portrait mode installation capability and edge blending

Aspect Ratio - 16:10
HDBaseT - Yes
Number of Imagers - 3-chip
Projector Applications - Corporate
Projector Applications - Digital Signage
Projector Applications - Education
Projector Technology Type - DLP
Supported Resolution - WXGA (1280x800)

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Brightness Full: 3500 lumens
Communication Formats: RS232C
Communication Ports: RS232
Contrast Ratio: 20000
Lamp Type: Laser
Lens Type: Manual Focus and Zoom
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 16.34 in
Height: 5.39 in
Width: 17.91 in
Product Weight: 24.25 lbs
Power Consumption: 460 W (470 VA) (250 W with LIGHT POWER set to NORMAL, 200 W with LIGHT POWER set to Ecosave1, 178 W with LIGHT POWER set to Ecosave2. 0.5 W with STANDBY MODE set to ECO, 8 W with STANDBY MODE set to NORMAL)
DLP™ chip Panel size: 16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ chip Display method: DLP™ chip x 1, DLP™ system
DLP™ chip Pixels: 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
Lens: Manual zoom (2.0x), manual focus, F 2.0 - 3.4, f 21.5 -43.0 mm
Throw Ratio: 1.53-3.09:1
Screen Size: 1.02 - 7.62 m (40 - 300 inches) diagonally, 16:10 aspect ratio
Center-to-corner uniformity: 90%
Resolution: 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
Scanning Frequency (HDMI/DVI-I (Digital)): fH: 27-100 kHz, fv: 24-120 Hz, dot clock: 25-162 MHz
Scanning Frequency (DVI-I (Analog)/RGB): fH: 15-100 kHz, fv: 24-120 Hz, dot clock: 162 MHz or lower
Scanning Frequency YPBPR (YCBCR): 480i(525i): fH 15.75 kHz; fV 60 Hz, 576i(625i): fH 15.63 kHz; fV 50 Hz, 480p(525p): fH 31.50 kHz; fV 60 Hz, 576p(625p): fH 31.25 kHz; fV 50 Hz, 720(750)/60p: fH 45.00 kHz; fV 60 Hz, 720(750)/50p: fH 37.50 kHz; fV 50 Hz, 1035(1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080(1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080(1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080(1125)/25p: fH 28.13 kHz; fV 25 Hz, 1080(1125)/24p: fH 27.00 kHz; fV 24 Hz, 1080(1125)/24sF: fH 27.00 kHz; fV 48 Hz, 1080(1125)/30p: fH 33.75 kHz; fV 30 Hz, 1080(1125)/60p: fH 67.50 kHz; fV 60 Hz, 1080(1125)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video): fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift: Vertical: +69%, -46% (manual), Horizontal: +28%, -37% (manual)
Keystone Correction Range: Vertical: +/-40°
Installation: Ceiling/floor, front/rear
Terminals HDMI IN: HDMI 19-pin x 1, HDCP compatible, Deep Color compatible; 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals DVI-I IN: DVI-I 29-pin x 1
Terminals DVI-I IN Digital: DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162MHz
Terminals DVI-I IN RGB: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Terminals DVI-I In YPBPR (YCBCR): Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals COMPUTER (RGB) IN: D-sub HD 15-pin (female) x 1
Terminals COMPUTER (RGB) IN R, G, B: R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: TTL, high impedance, positive/negative automatic NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Terminals COMPUTER (RGB) IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75 ohms
Terminals AUDIO IN: M3 (L, R) x 1, 0.5 Vrms
Terminals AUDIO OUT: M3 (L, R) x 1 (monitor out: 0-1.8 Vrms, variable)
Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible, 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
Terminals 3D SYNC OUT: Mini DIN 3-pin x 1, for 3D transmitter connection
Power Cord Length: 3.0 m (9 ft 10 in)
Cabinet materials: Molded plastic
Technology: 1-chip DLP LED/ Laser