5000 Lumens XGA Fixed Installation LCD Projector

Model: PT-FX500U

Powered lens-shift and optional lenses mounting
XGA Native resolution
Compact projector delivers 5000 lm of brightness
Dust-resistant cabinet and extra long life Eco filter
Flexible installation with powered lens-shift and optional lenses

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PT-FX500U is a 5000 ANSI lumens XGA fixed installation LCD projector. It features dust-resistant cabinet and extra long life Eco filter, flexible installation with powered lens-shift and optional lenses.

Powered lens-shift and optional lenses mounting
XGA Native resolution
Compact projector delivers 5000 lm of brightness
Dust-resistant cabinet and extra long life Eco filter
Flexible installation with powered lens-shift and optional lenses

Aspect Ratio - 4:3
HDBaseT - Yes
Integrated Speakers - Yes
Projector Applications - Corporate
Projector Technology Type - LCD
Projector Type - Short Throw
Supported Resolution - XGA (1024x768)
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Brightness Full: 5000 lumens
Communication Formats: RS-232C
Communication Ports: RS-232, USB
Contrast Ratio: 10000
Lamp Type: 270W UHM
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 461 Watt
Standby Power: 0.80 Watt
Depth: 15.68 in
Height: 5.71 in
Width: 19.61 in
Product Weight: 17.42 lbs
Noise: 33 dB
Main Unit:
•BTU value: Max 1,365BTU
•LCD panel
•Panel size: 16 mm (0.63 in) diagonal (4:3 aspect ratio)
•Display method: Transparent LCD panel (x3, R/G/B)
•Drive method: Active matrix
•Pixels: 1,024,000 (1,280 x800) x3, total of 3,072,000 pixels
•Lens: Powered zoom (throw ratio 1.32-2.44:1),Manual focus, F 1.6-2.2, f 17.1-31.7 mm
•Screen size: 1.02 - 7.62 m (40 - 300 inches) (4:3 aspect ratio)
•Center-to-corner uniformity: 90%
•Scanning frequency
•HDMI: fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 25 - 162 MHz
•RGB: fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 162 MHz or lower
•YPBPR (YCBCR)
•525i (480i): fH15.73kHz; fV59.94Hz
•625i (576i): fH15.63kHz; fV50Hz
•525p (480p): fH31.47kHz; fV60Hz
•625p (576p): fH31.25kHz; fV50Hz
•750 (720)/60p: fH45.00kHz; fV60Hz
•750 (720)/50p: fH37.50kHz; fV50Hz
•1125 (1080)/60i: fH33.75kHz; fV60Hz
•1125 (1080)/50i: fH28.13kHz; fV50Hz
•1125 (1080)/25p: fH28.13kHz; fV25Hz
•1125 (1080)/24p: fH27.00kHz; fV24Hz
•1125 (1080)/24sF: fH27.00kHz; fV48Hz
•1125 (1080)/30p: fH33.75kHz; fV30Hz
•1125 (1080)/60p: fH67.50kHz; fV60Hz
•1125 (1080)/50p: fH56.25kHz; fV50Hz
•Video/S-Video
•fH: 15.75kHz, fV: 59.94Hz [NTSC/NTSC4.43/PAL-M/PAL60]
•fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
•Installation: Ceiling front/rear
•Terminals
•HDMI IN 1/HDMI IN 2
•HDMI 19-pin ×2,
•Deep Color, compatible with HDCP
•Audio signal: linear PCM (sampling frequencies: 48kHz, 44.1kHz, 32kHz)
•RGB 1 IN
•BNC x5
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic
•Y, PB, PR (Y, CB, CR)
•Y: 1.0Vp-p (including sync signal), PBPR(CBCR): 0.7Vp-p, 75 ohms
•Y/C
•Y: 1.0Vp-p (including sync signal), C: 0.286Vp-p, 75 ohms
•RGB 2 IN
•D-sub HD 15-pin (female) x1
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic VIDEO IN Pin jack x1, 1.0Vp-p, 75 ohms
•MONITOR OUT D-sub HD 15-pin (female) x1
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic
•Y, PB, PR: Y: 1.0Vp-p (including sync signal), PBPR: 0.7Vp-p, 75 ohms
•AUDIO IN 1/AUDIO IN 2 M3 x2, 0.5Vrms, input impedance: 22 kilohms or more
•AUDIO IN 3 Pin jack(L, R) x1, 0.5Vrms, input impedance: 22 kilohms or more
•VARIABLE AUDIO OUT M3 x1 (monitor out, stereo)
•0 - 2.0Vrms, variable, output impedance: 2.2 kilohms or less
•SERIAL IN D-sub 9 p x1, for external control (RS-232C compliant)
•REMOTE 1 IN D-sub 9-pin (female) ×1, for external control (parallel)
•REMOTE 2 IN M3 jack x1 for wired remote control
•LAN RJ-45 x 1 for network connection 10Base-T/100Base-TX,
•compatible with Art-Net, PJLink™(Class 1)
•WIRELESS USB Type A x1, for wireless projection with optional dongle (ET-WML100)
•DC OUT USB Type A x1, for power supply (DC5 V, max 900 mA)
•Power cord length: 3.0 m (9 ft10 in)
•Cabinet materials: Molded plastic
Remote control unit:
•Power supply
•Operation range
•Dimensions (WxHxD)
•Weight
•3 V DC (R03/LR03/AAAtypebattery x2)
•Approx. 30 m (98 ft5 in) when operated from directly in front of the
•signal receptor
•48 x145 x27 mm (1-7/8 x5-23/32 x1-1/16inches)
•Approx. 102 g (3.6 oz) (including batteries)
Supplied Accessories:
•Power cord (including power cord holder)(x1)
•Wireless/wireled remote control unit (x1)
•Batteries for remote control (AAA/R03/LR03 typex2)
•Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
•Control Software) (x1)
•Lens cap (x1) |