5300 Lumens XGA Fixed Installation LCD Projector

Model: PT-EX520U

LCD, 5300 lumens, XGA
High brightness in compact and lightweight body
Dust resistant cabinet and up to 15 000 hours maintenance free Eco Filter
Powered with lens-shift and a wide range of optional lenses

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

Compact and powerful LCD projectors designed to light up lecture theaters and conference rooms. The PT-EX520U is a 5300 ANSI lumens XGA fixed installation LCD projector. It features dust-resistant cabinet and extra long life Eco filter, flexible installation with powered lens-shift and optional lenses.

LCD, 5300 lumens, XGA
High brightness in compact and lightweight body
Dust resistant cabinet and up to 15 000 hours maintenance free Eco Filter
Powered with lens-shift and a wide range of optional lenses

Aspect Ratio - 4:3
Number of Imagers - 1-chip
Projector Applications - Corporate
Projector Applications - Large Venue
Projector Technology Type - LCD
Projector Type - Short Throw
Supported Resolution - XGA (1024x768)
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Brightness Full: 5300 lumens
Communication Formats: RS-232C
Communication Ports: USB, RS-232
Contrast Ratio: 2000
Lamp Type: 320W UHM
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 461 Watt
Standby Power: 0.50 Watt
Depth: 15.68 in
Height: 5.71 in
Width: 19.61 in
Product Weight: 18.52 lbs
Noise: 35 dB
Main Unit:
•BTU value: Max 1,573BTU
•LCD panel
•Panel size: 16.3 mm (0.64 in) diagonal (16:10 aspect ratio)
•Display method: Transparent LCD panel (x3, R/G/B)
•Drive method: Active matrix
•Pixels: 1,024,000 (1,280 x800) x3, total of 3,072,000 pixels
•Lens: Powered zoom (throw ratio 1.22-2.26:1),powered focus, F 1.6-2.2, f 17.1-31.7 mm
•Screen size: 1.02 - 10.16 m (40 - 400 inches) (16:10 aspect ratio)
•Center-to-corner uniformity: 90%
•Scanning frequency
•HDMI: fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 25 - 162 MHz
•RGB: fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 162 MHz or lower
•YPBPR (YCBCR)
•525i (480i): fH15.73kHz; fV59.94Hz
•625i (576i): fH15.63kHz; fV50Hz
•525p (480p): fH31.47kHz; fV60Hz
•625p (576p): fH31.25kHz; fV50Hz
•750 (720)/60p: fH45.00kHz; fV60Hz
•750 (720)/50p: fH37.50kHz; fV50Hz
•1125 (1080)/60i: fH33.75kHz; fV60Hz
•1125 (1080)/50i: fH28.13kHz; fV50Hz
•1125 (1080)/25p: fH28.13kHz; fV25Hz
•1125 (1080)/24p: fH27.00kHz; fV24Hz
•1125 (1080)/24sF: fH27.00kHz; fV48Hz
•1125 (1080)/30p: fH33.75kHz; fV30Hz
•1125 (1080)/60p: fH67.50kHz; fV60Hz
•1125 (1080)/50p: fH56.25kHz; fV50Hz
•Video/S-Video
•fH: 15.75kHz, fV: 59.94Hz [NTSC/NTSC4.43/PAL-M/PAL60]
•fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
•Installation: Ceiling front/rear
•Terminals
•HDMI IN 1/HDMI IN 2
•HDMI 19-pin ×2,
•Deep Color, compatible with HDCP
•Audio signal: linear PCM (sampling frequencies: 48kHz, 44.1kHz, 32kHz)
•RGB 1 IN
•BNC x5
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic
•Y, PB, PR (Y, CB, CR)
•Y: 1.0Vp-p (including sync signal), PBPR(CBCR): 0.7Vp-p, 75 ohms
•Y/C
•Y: 1.0Vp-p (including sync signal), C: 0.286Vp-p, 75 ohms
•RGB 2 IN
•D-sub HD 15-pin (female) x1
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic VIDEO IN Pin jack x1, 1.0Vp-p, 75 ohms
•MONITOR OUT D-sub HD 15-pin (female) x1
•R,G,B:
•0.7Vp-p, 75 ohms, (G: 1.0Vp-p, 75 ohms for sync on G)
•HD/VD, SYNC: TTL, high impedance, positive/negative automatic
•Y, PB, PR: Y: 1.0Vp-p (including sync signal), PBPR: 0.7Vp-p, 75 ohms
•AUDIO IN 1/AUDIO IN 2 M3 x2, 0.5Vrms, input impedance: 22 kilohms or more
•AUDIO IN 3 Pin jack(L, R) x1, 0.5Vrms, input impedance: 22 kilohms or more
•VARIABLE AUDIO OUT M3 x1 (monitor out, stereo)
•0 - 2.0Vrms, variable, output impedance: 2.2 kilohms or less
•SERIAL IN D-sub 9 p x1, for external control (RS-232C compliant)
•REMOTE 1 IN D-sub 9-pin (female) ×1, for external control (parallel)
•REMOTE 2 IN M3 jack x1 for wired remote control
•LAN RJ-45 x 1 for network connection 10Base-T/100Base-TX,
•compatible with Art-Net, PJLink™(Class 1)
•WIRELESS USB Type A x1, for wireless projection with optional dongle (ET-WML100)
•DC OUT USB Type A x1, for power supply (DC5 V, max 900 mA)
•Power cord length: 3.0 m (9 ft10 in)
•Cabinet materials: Molded plastic
Remote control unit:
•Power supply
•Operation range
•Dimensions (WxHxD)
•Weight
•3 V DC (R03/LR03/AAAtypebattery x2)
•Approx. 30 m (98 ft5 in) when operated from directly in front of the
•signal receptor
•48 x145 x27 mm (1-7/8 x5-23/32 x1-1/16inches)
•Approx. 102 g (3.6 oz) (including batteries)
Supplied Accessories:
•Power cord (including power cord holder)(x1)
•Wireless/wireled remote control unit (x1)
•Batteries for remote control (AAA/R03/LR03 typex2)
•Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
•Control Software) (x1)
•Lens cap (x1) |
Technology: LCD