12000 Lumens 3-chip DLP Projector

Series: Pro AV

Model: PT-DS12KU

3-chip DLP, 12000 lumens, SXGA+
High brightness and high contrast ratio make bright, crisp and sharp image
Dual lamp system with Lamp Relay mode enables 24/7 operation
10,000:1 contrast ratio
Edge blending function and colour matching

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

3-chip DLP projector. Panasonic's original dual-lamp system, with its new 380 W lamp, helps to make the body compact, while providing a full 12,000 lumens of brightness with 120 V AC operation. The replacement lamp unit (ET-LAD310A/ETLAD310AW) can be used with all of the PT-DZ8700/PT-DZ110X Series projectors. This reduces the number of lamp types that need to be kept in stock when multiple projectors are used. Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1* contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks and provides images with more detailed textures.

3-chip DLP, 12000 lumens, SXGA+
High brightness and high contrast ratio make bright, crisp and sharp image
Dual lamp system with Lamp Relay mode enables 24/7 operation
10,000:1 contrast ratio
Edge blending function and colour matching

Aspect Ratio - 4:3
Number of Imagers - 3-chip
Projector Applications - 3D
Projector Technology Type - DLP
Projector Type - Short Throw
Supported Resolution - SXGA+ (1400x1050)
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Brightness Full: 12000 lumens
Chip Quantity: 3
Contrast Ratio: 10000
Lamp Type: 380W UHM
Lens Type: Optional powered zoom/focus
Technology: DLP
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 220 Volts
Depth: 21.59 in
Height: 7.87 in
Width: 20.87 in
Product Weight: 52.91 lbs
Noise: 45 dB
DLP™ chip Panel size: 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ chip Display method: DLP™ chip x 3(R, G, B), DLP™ projection system
DLP™ chip Pixels: 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Screen Size: 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 4:3 aspect ratio
Center-to-corner uniformity: 90%
Scanning Frequency (SDI): Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; Dual-link HD-SDI signal (X' Y' Z' 4:4:4 12-bit): SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF; 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i)
Scanning Frequency (HDMI/DVI-D/RGB): Horizontal: 15 kHz-100 kHz, Vertical: 24 Hz-120 Hz, dot clock: 25-162 MHz or lower (HDMI/DVI: 25 MHz-162 MHz)
Scanning Frequency YPBPR (YCBCR): 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video/S-Video): fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +/-50 % (+/-40 % with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Optical axis shift Horizontal: +/-30 % (+/-20 % with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone Correction Range: Vertical +/-40°, horizontal +/-15°(vertical +/-22° and horizontal +/-15° with the ET-D75LE5/LE50, vertical +/-28° and horizontal +/-15° with the ET-D75LE6); When using only the KEYSTONE correction of the Geometric Adjustment function: Vertical +/-40°, horizontal +/-15°; When using the optional upgrade kit ET-UK20: Vertical +/-40° and horizontal +/-40° with the ET-D75LE1/LE2/LE10/LE20,vertical +/-45°and horizontal +/-40° with the ET-D75LE3/LE4/LE30/LE40, vertical +/-22° and horizontal +/-15° with the ET-D75LE5/LE50,vertical +/-28° and horizontal +/-15° with the ET-D75LE6; When using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function: Vertical +/-20°, horizontal +/-15°(vertical +/-8° and horizontal +/-8° with the ET-D75LE5/50,vertical +/-10° and horizontal +/-10° with the ET-D75LE6)
Installation: Ceiling/floor, front/rear
Terminals SDI IN 1: BNC x 1; Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-A); 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant
Terminals SDI IN 2: BNC x 1,Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-B); HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant
Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz
Terminals RGB 1 IN: BNC x 5
Terminals RGB 1 IN R, G, B: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals RGB 1 IN S-Video signal: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals RGB 2 IN: D-sub HD 15-pin (female) x 1
Terminals RGB 2 IN R, G, B: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals VIDEO IN: BNC x 1, 1.0 Vp-p, 75 ohms
Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals 3D SYNC 2 OUT: BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals Remoter 1 In: M3 jack x 1 for wired remote control
Terminals Remoter 1 Out: M3 jack x 1 for link control
Terminals Remoter 2 In: D-sub 9-pin x 1 for external control (parallel)
Terminals LAN: RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™(class 1)
Power Cord Length: 3.0 m (9 ft 10 in)
Cabinet materials: Molded plastic
Operation noise: 45 dB (high mode), 43 dB (middle mode), 37 dB (eco mode)