top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SMPTE 2110 and IPMX to SDI Transmitter/Receiver
Model: CIP-SRS
- 12G-SDI I/O
- 1G and 2.5G support over RJ45
- Single device that transmits or receives IP signals
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
Product Info
Tech Specs
Matrox ConvertIP SRS is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Delivering up to 4K60 image quality and featuring one RJ45 port, ConvertIP SRS is designed for both 1G and 2.5G AV workflows and is optimal for an ultra-low latency experience. ConvertIP SRS supports Power over Ethernet through its RJ45 connection, and power redundancy through an optional power supply unit.
- 12G-SDI I/O
- 1G and 2.5G support over RJ45
- Single device that transmits or receives IP signals
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
- Rackmountable - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC, ICES, KC, RCM, REACH
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 18 Watt
- Current Draw: 0.50 Amps
- DC Voltage: 12 Volts
- Depth: 7.88 in
- Height: 1.39 in
- Width: 5.50 in
- Product Weight: 1.09 lbs
- Color: Black
- Warranty (Length/Type): 3 Years
- Video Input: TX mode: 12G SDI
- Video Output: RX mode: 12G SDI
- Video Resolution: HD and 4K resolutions (including broadcast)
- VANC ancillary data processing: Yes
- Audio Input/Output: Up to 16 channels of audio embedded in SDI output signal
- Network Connector: 1x RJ45 LAN port for Media and Control with PoE+ (1/2.5G)
- Control and management: Matrox ConvertIP Command Center (web UI), Matrox ConvertIP Manager (software application)
- Maximum Video Resolutions: 4096 x 2160 60p
- Bit Depth and Color Space: YCbCr 4:2:2 10-bit, SDR/HDR1
- Video Scaling: High Quality multi-tap 10-bit Up/Down Scaler
- Video Deinterlacing: Yes
- Color Space Conversion: Yes
- Video: Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content, ProAV Colibri codec included: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps; JPEG-XS codec upgrade required: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
- Audio: Uncompressed PCM (~1 Mbps/ch)
- Latency: Less than a 1/4 frame (<4 ms)
- Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
- IP addressing: IPv4, IPv6, DHCP (default) and static IP
- Supported Protocols: SMPTE ST 2110 (-10, -22, -30, -401), SMPTE 2059 (-1, -2), IPMX
- Command and Control: HTTPS over TCP
- Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
- PoE+: Yes (IEEE 802.3at Type 2)
- Operating Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
- Operating Humidity: 20% to 80% non-condensing
- Storage Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
- Storage Humidity: 5% to 95% non-condensing
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Matrox Graphics Inc.
Model: CIP-SRS
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page