top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
15W Paging/re-entrant Horn with Transformer, Grille, Trim Ring Ideal for School Iintercom Systems
Model: LUH-15TA
- 15W compression driver
- 25V/70V/100V transformer (screwdriver-adjustable tap selector switch in front and rear)
- Self-contained cast aluminum housing with moisture-seal cover
- Contoured aluminum trim ring
- Fine perforation press-fit aluminum grille fits snugly for a hardware-free appearance, while helping to protect the front of the horn from nesting birds and insects.
Product Info
Tech Specs
Documents
Ready-to-install re-entrant horn with weather-resistant housing is engineered for versatile labor-saving installation in brick, concrete block, plaster, drywall, or acoustic tile (indoors or outdoors, recessed or surface-mount). For paging and general voice communications (25V, 70V, 100V or 8ohm). Ideal for school intercom systems (25V).
- 15W compression driver
- 25V/70V/100V transformer (screwdriver-adjustable tap selector switch in front and rear)
- Self-contained cast aluminum housing with moisture-seal cover
- Contoured aluminum trim ring
- Fine perforation press-fit aluminum grille fits snugly for a hardware-free appearance, while helping to protect the front of the horn from nesting birds and insects.
- Network Grey powder epoxy finish.
- Provides clear intelligibility with high SPL output over the extended vocal range.
- Loudspeaker Voltage - 100V
- Loudspeaker Voltage - 25V
- Loudspeaker Voltage - 70V
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 7.40 kHz
- Maximum Frequency Response (Bandwidth): 7400 Hz
- Minimum Frequency Response (Bandwidth): 740 Hz
- Minimum Frequency Response (Bandwidth): 0.74 kHz
- Construction: Cast aluminum trim ring and housing, Perforated aluminum grille
- Maximum SPL (Sound Pressure Level): 116.80 dB
- Power Handling: 15 Watt
- Wireless: No
- Product Weight: 4.90 lbs
- Dimensions: Housing: 7.1 in diameter housing with 8 in diameter face x 3.72 in D (180 x 203 x 94 mm), Horn, trim ring and grille: 7.1 in diameter housing with 9.6 in diameter trim ring/grille x 3.3 D x 0.772 in projection (180 x 244 x 84 x 19 mm)
- Mounting Bolt Circle: 7.625 in (194mm) with 4 holes spaced to mount an E.I.A. 8 in speaker grille
- Cutout Diameter: 0.7.25 in (184 mm)
- Installed Depth: 3.3 in
- Mounting Projection: 0.772 in
- Housing diameter: 7.1 in
- Required Hole Diameter: 7.25 in
- Transformer Input Impedance: 5000, 2500, 1300, 666, 333, 133, 89, 45 ohms (nominal)
- Conical Dispersion Angle: 80° conical at 2kHz octave (-6dB)
- 100V Taps: 2, 4, 7.5, 15 Watt
- 25V Taps: 0.13, 0.25, 0.5, 1, 1.9, 4.7, 7.5, 15 Watt
- 70V Taps: 1, 2, 3.8, 7.5, 15 Watt
- Certifications: CSA, UL
1908-LUH15TA.pdf
299467 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Lowell Manufacturing Company
Model: LUH-15TA
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page