top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4" in-ceiling Dual Cone Speaker System
Model: ES-4T
- 4” dual cone full range driver
- 16W transformer. Tap selector switch (mounted behind the grille) has selections for 25V, 70V or 100V speaker systems and 8 ohm transformer bypass position.
- Low-profile front baffle formed from UV-rated high impact plastic
- Durable 20 gauge zinc-plated steel enclosure
- Built-in reversible mounting dogs aid fast installation, while allowing the speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 2.125”
Product Info
Tech Specs
Documents
The ES-4T speaker system produces excellent intelligibility for speech and full-frequency response for music, making it ideal for retail, commercial, industrial, institutional and residential applications. This self-contained, in-ceiling speaker system with 4” dual cone full range driver has a high-frequency whizzer cone to provide the kind of crisp, high-frequency response that would typically only be produced by a coaxial speaker design. The ported enclosure is tuned for extended low-frequency response, while the speaker’s wide dispersion can actually reduce the number of speakers required to produce even coverage in distributed speaker systems.
- 4” dual cone full range driver
- 16W transformer. Tap selector switch (mounted behind the grille) has selections for 25V, 70V or 100V speaker systems and 8 ohm transformer bypass position.
- Low-profile front baffle formed from UV-rated high impact plastic
- Durable 20 gauge zinc-plated steel enclosure
- Built-in reversible mounting dogs aid fast installation, while allowing the speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 2.125”
- Ported enclosure tuned for extended bass response
- Removable (four-pin) Phoenix-style connector with two terminals for input to speaker and two parallel terminals for output to next speaker in string.
- Mounting C-ring and two support rails prevent sagging when installed in lay-in tile ceilings.
- Press-fit, fine mesh grille (white) includes scrim and pull tool
- Paper template to assist in cutting mounting holes
- Plastic shield to protect driver when painting
- Weight 4.1 lbs. each (sold in pairs)
- Loudspeaker Mount Type - Ceiling
- Spec Sheet available - Yes
- PERFORMANCE SPECIFICATIONS:
- Power Handling: 25W RMS (at 8 ohms) measured per EIA Standard RS-426B
- Sensitivity: 85.7 dB log average SPL (at 8 ohms) @ 1W/1M over the frequency response range, measured in half-space.
- Maximum SPL: 99.7 dB (calculated based on power rating and measured 8 ohm sensitivity).
- Impedance: 8 ohms (nominal), 7.3 ohms @ 342 Hz (minimum).
- Frequency Response: 108Hz – 20kHZ ± 6dB
- Dispersion Angle: 135° conical @ 2kHz octave (-6dB)
- Transformer Taps:
- 100V (16, 8, 4, 2W):
- 70V (16, 8, 4, 2, 1W):
- 25V (2, 1, .5, .25, .13W):
construction (drywall or plaster ceiling)
before the finished ceiling is
installed. Order Model No. ES-4-RIB
separately.
1167-ES4T.pdf
2013836 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Lowell Manufacturing Company
Model: ES-4T
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page