Signal Routing / Switching : Routing and Matrix Switchers : Kramer - VS-88DTP/110V

8x8 DVI Matrix Switcher with Twisted Pair Outputs

Series: Main

Model: VS-88DTP/110V

Part #: 20-70966010

Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible - Not HDCP Compliant
DGKat™ Signal Integration -
Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

The VS-88DTP is a high-performance matrix switcher for DVI signals. The unit reclocks and equalizes the signal and can route any or all inputs to any or all DGKat twisted pair outputs simultaneously.

Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible - Not HDCP Compliant
DGKat™ Signal Integration -
Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems
System Range - Up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable; up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable; up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable
Cable -
Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used.
The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges.
Use only shielded cable where both ends of the shield are soldered to ground.
Flexible Control Options - Front panel, IR remote (included), RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included)
Output Disconnect - Each output
Front Panel Lockout
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed
Worldwide Power Supply – 100-240V AC
Standard 19” Rack Mount Size - 1U. Rack “ears” included
Applications:
- Conference room presentations
- Advertising
- Rental and staging

Matrix Switcher Video Input Type - Other
Rackmountable - Yes
Routing Type - Audio
Routing Type - Video
Supported Resolution - 1080p (1920x1080)
Supported Resolution - UXGA (1600x1200)
Supported Resolution - WUXGA (1920x1200)
Supported Resolution - Other
Switcher Type - Audio
Switcher Type - Video
Warranty - Yes
Spec Sheet available - Yes

Bandwidth: 4.95 Gbps (1.65Gbps per graphic channel)
Controls: Front panel buttons, infrared remote control transmitter, RS-232, RS-485 & Ethernet
Depth: 7 in
Height: 2 in
Outputs: 8 DGKat twisted pair on RJ-45 connectors
Width: 19 in
Power Source: 100-240V AC; 50/60Hz, 43VA
Regulatory Compliance: WEEE
Accessories: Power cord, infrared remote controller, null-modem adapter, rack "ears"
Inputs: 8 DVI-D on DVI-I Molex 24-pin (F) connectors (non-HDCP compliant), 1.2Vpp; DDC signal 5Vpp (TTL)
Max Resolution: Up to UXGA; 1080p, 1920x1200
Product Weight: 5.50 lbs
COMPLIANCE WITH STANDARDS: Supports DVI 1.1
Warranty (Length/Type): 7 Years Limited
Certifications: CE
Number of Inputs: 8
Number of Outputs: 8
Rack Units (Height): 2
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts