top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
High-performance, highly-scalable, AVoIP Decoder for 4K60 4:2:0, HDR10 over 1G Network
Model: KDS-DEC7
- Outstanding end-user experience :
- Rich set of inputs and interfaces
- Easy-to-use KM/KVM - Searchable OSD Menu for KM and fully configurable KVM roaming
- Large scale video wall - up to 16x16
- Instantaneous switching time - 1 second
Product Info
Tech Specs
Documents
KDS-DEC7 decoder is an advanced receiver for streaming 4K at 60Hz (4:2:0) video signals via Ethernet over copper cable. It decodes streams over an IP network to HDMI output, and transmit the USB, IR, RS232, or CEC signal over IP network.
- Outstanding end-user experience :
- Rich set of inputs and interfaces
- Easy-to-use KM/KVM - Searchable OSD Menu for KM and fully configurable KVM roaming
- Large scale video wall - up to 16x16
- Instantaneous switching time - 1 second
- Ideal for large-scale deployments :
- Highly scalable - 999 channels build in support
- State of the art management device
- Rich set of management capabilities - Standard P3K Open API , LCD screen for configuration
- Robust security:
- Enterprise IT-grade security - 802.1x and HTTPS/TLS
- Security certification - OWASP Top 10 certificate
- Separate ETH ports for optimal security and experience
- New HW architecture that enables robust FW update
- Simple planning and rollout:
- Cost-effective from day one
- Full product range for any site, any application
- Plug-and-play with Netgear M4250 AVoIP switches, Kramer Control, KDS-USB2, etc.
- PoE Support - Using PoE switch - up to 13W consumption
- Alternative sources/destinations - HDMI Loop-Through on Encoder and HDMI Input on Decoder
- Analog Audio - Embedding and De-embedding
- Control gateway - Through P3K control/communicate with IR, RS232, or CEC to the connected devices
- Applications:
- For real-time essential installations such as command and control rooms
- For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
- AV distribution systems with one or more sources and many displays in schools, universities, and public venues
- For AV installations where low latency KM/KVM capabilities are required
- AV-over-IP - Yes
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- IP Signals Supported - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Active Power: 6 Watt
- Current Draw: 24 Amps
- Depth: 5.71 in
- Height: 1.09 in
- Shipping Depth (with packaging): 7.05 in
- Shipping Height (with packaging): 2.99 in
- Shipping Width (with packaging): 12.28 in
- Width: 7.44 in
- Product Weight: 1.54 lbs
- Shipping Weight: 1.98 lbs
- Inputs: 1 HDMI: On a female HDMI connector
- Outputs: 1 HDMI: On a female HDMI connector
- Ports: 2 Ethernets: On RJ-45 connectors, 1 Balanced Audio: On a 5-pin terminal block connector, 1 RS-232: On a 3-pin terminal block connector, 1 IR: On a 3.5mm TRS connector, 2 USB: On USB-A connectors
- Video: Compression Standard: JPEG based, private stream, Max Resolution: 4K60 4:2:0 or 4K30 4:4:4, HDR 10: Up to 4K30 4:2:2 12 bit
- User Interface: Indicators: LINK, NET and ON LEDs, front panel LCD Display, Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
- Storage Temperature: -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
- Humidity: 10% to 90%, non-condensing
Decoder
1413273 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Kramer Electronics USA, Inc.
Model: KDS-DEC7
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page