Zum Wireless DALI® Controller
Model: ZUMMESH-JBOX-DALI
- Zum™ wireless junction-box-mounted DALI controller
- Pair and play wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Control of DALI compliant dimmable LED, fluorescent loads, or GL-EXP DALI expansion modules
- Accommodation for a Zum™ Network Bridge
The Zum™ wireless ZUMMESH-JBOX-DALI is a single-channel DALI controller capable of controlling up to 64 DALI compatible drivers. The ZUMMESH-JBOX-DALI communicates with other Zum devices such as keypads, occupancy sensors, vacancy sensors, and daylight sensors. Zum Mesh wireless technology affords easy pair and play integration as part of a complete Zum commercial lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, HVAC system integration and centralized monitoring and management (sold separately).
Integrated DALI Power Supply
The innovative design of the ZUMMESH-JBOX-DALI eliminates the need for the external power supplies required by other DALI controllers on the market. The ZUMMESH-JBOX-DALI provides 14 V of power to the DALI bus.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity drive the potential for significant energy savings. Lights will turn off automatically when the room is vacant and dim gradually according to the amount of natural daylight in the room. This reduces energy usage while maintaining a consistent light level for a comfortable workspace.
Pair and Play Setup
Designed with flexibility and ease-of-use in mind, the ZUMMESH-JBOX-DALI is pre-programmed with pair and play functionality. An installer can simply install the dimmer in a room along with Zum occupancy or vacancy sensors and/or a daylight sensor, set up the room with a few quick button taps and then use the dimmer to control the lights in the room. Room setup can also be accomplished using the Zum app if the room is equipped with a Zum Network Bridge. The Zum Network Bridge also enables centralized monitoring and management via a Zum Floor Hub and Zum Net Wireless Gateway (sold separately).
- Zum™ wireless junction-box-mounted DALI controller
- Pair and play wireless integration with Zum keypads, occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Control of DALI compliant dimmable LED, fluorescent loads, or GL-EXP DALI expansion modules
- Accommodation for a Zum™ Network Bridge
- Accommodates up to 15 DALI Groups, up to 64 DALI devices
- Integrated DALI power supply
- Flying lead wiring connections
- Knockout mount to a standard 4 in. square junction box
- Systems Controlled - Lighting
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Wireless: Yes
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 1.32 in
- Height: 3.25 in
- Width: 4.17 in
- Color: White
- Warranty (Length/Type): Limited
- Load Control:
•DALI Groups: 15
•Drivers: 64
•Load Types: Control of DALI compliant dimmable LED, fluorescent loads, or GL-EXP-DALI expansion modules - Wireless Communications:
•RF Transceiver: Z?m Mesh 2-way RF; 2.4 GHz ISM; Channels 15, 20, 25 or 26 (channel auto-selected); IEEE 802.15.4 compliant; AES-128 encryption
•Range (Typical): 50 ft (15 m) to nearest peer-to-peer mesh network device(s); Subject to site-specific conditions and individual device capabilities - Controls and Indicators:
•TEST: (1) Pushbutton and (1) green LED, press and release the button to toggle the load output on and off, press and hold to cycle the dimming level up and down, LED indicates the load output is energized, also used for room setup and factory reset
•SETUP: (1) Pushbutton and (1) red LED, used for room setup and factory reset - Connections:
•Hot: (1) flying lead, black, line power input
•Neutral: (1) flying lead, white, neutral
•Purple: (1) flying lead, purple, DALI input/output, low voltage
•Grey: (1) flying lead, grey, DALI input/output, low voltage - Environmental:
•Humidity: 10% to 90% RH (non-condensing) - Construction:
•Housing: Plastic, white, UL 94 5VA flame rated
•Mounting: Mounts to the side of a 4-in. square junction box via a 1/2 in. conduit knockout, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/