USB 3.2 Extender over CAT 6a/7 Cable, Local and Remote
Model: USB-EXT-3 KIT
- Point-to-point connectivity for USB signal extension over CAT6a/CAT7 up to 330 ft (100 m)
- USB 3.2 Gen 1 data rate up to 5 Gbps
- Support of USB 3.2, 2.0, and 1.1 signals simultaneously
- Support of all USB transfer types: control, interrupt, isochronous (ISO), and bulk
- Enhanced support for USB cameras and video capture devices using ISO transport
The Crestron USB-EXT-3 KIT offers a highly versatile USB 3.2 extender to support USB 3.2 peripherals such as UC soundbars and cameras. The maximum length of a standard 3.2 cable is limited to 6 ft (1.8 m), which is not adequate for most integrated solutions used in conference rooms and other meeting spaces. The USB-EXT-3 KIT provides a solution for the simultaneous extension of all USB signals up to 330 ft (100 m) over CAT 6a/7 cable at high speed up to 5 Gbps.
Support of any type of USB signal places special demands on USB transport technology. The USB-EXT-3 KIT fully supports USB 3.2 isochronous (ISO) transport, which offers enhanced support for UC cameras and video capture devices. USB traffic is guaranteed a certain percentage of all USB bandwidth. Other connected USB devices, such as bulk storage devices, will not decrease the performance of the ISO stream, resulting in high-quality video performance.
- Point-to-point connectivity for USB signal extension over CAT6a/CAT7 up to 330 ft (100 m)
- USB 3.2 Gen 1 data rate up to 5 Gbps
- Support of USB 3.2, 2.0, and 1.1 signals simultaneously
- Support of all USB transfer types: control, interrupt, isochronous (ISO), and bulk
- Enhanced support for USB cameras and video capture devices using ISO transport
- USB-EXT-3-LOCAL extender for connection to USB host
- USB-EXT-3-REMOTE extender for connection to up to four USB devices at one location
- Gigabit Ethernet pass-through port
- Plug-and-play functionality without the need for additional drivers
- Compatibility with the Windows®, macOS®, Linux®, and Chrome OS™ operating systems
- Freestanding or surface mountable (optional mounting kit included)
- 24 VDC power pack included for each extender
- Extender Type - USB
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: IC, CE, FCC
- COMMUNICATIONS:
•Link: Proprietary link for point-to-point connection between the USB-EXT-3-LOCAL and USB-EXT-3 REMOTE
•USB: Speeds: USB 3.2 Gen 1 up to 5 Gbps; USB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps Maximum Number of Devices: 30 devices using 1 USB port on USB-EXT-3-REMOTE and maximum of 3 hubs
•Ethernet: 100BASE-TX/1000BASE-T for LAN passthrough - Connectors - USB-EXT-3-LOCAL:
•24V 1A: DC power connector; 24 VDC power input
•USB: (1) USB Type-B connector, female; USB 3.2 Gen 1 host port for connection to computer, media server, game console, or other USB host; Backward compatibility with USB 2.0 and USB 1.1
•Link: (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-REMOTE; Up to 330 ft (100 m) over CAT6a/7 cable
•LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable
•Config: Reserved for factory use only - Connectors - USB-EXT-3-REMOTE:
•24V 2.71A: DC power connector; 24 VDC power input
•USB: (4) USB Type-A connector, female; USB 3.2 Gen 1 device ports for connection to USB cameras, video capture devices, flash drives, keyboards, mice, hubs, or other USB devices; Maximum number of USB hubs supported; Backward compatibility with USB 2.0 and USB 1.1; Available Power: 1.2A (6W) per USB port
•Link: (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-LOCAL; Up to 330 ft (100 m) over CAT6a/7 cable
•LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable
•Config: Reserved for factory use only - Controls and Indicators:
•Power: (1) LED. Green indicates that power is being supplied from the included power pack.
•Mode: Reserved for factory use only
•Status: (1) LED. Solid green indicates that the system is functioning normally. Flashing green indicates that the system is booting or may also indicate a temperature warning in unison with the Link, USB 2, and USB 3 LEDs.
•Link: (1) LED. Green indicates that a link has been established between the local and remote extenders.
•USB 2: (1) LED. Solid green indicates that a USB 2 connection is detected when a host device is connected to the USB port on the USB-EXT- 3-LOCAL. Flashing green indicates that the USB 2 connection has been suspended or is in sleep mode.
•USB 3: (1) LED. Solid green indicates that a USB 3 connection is detected when a host device is connected to the USB port on the USB-EXT-3-LOCAL. Flashing green indicates that the USB 3 connection has been suspended or is in sleep mode.
•LAN: (2) LEDs on RJ-45 connector. Solid green indicates that a link has been established between the extender and the network or network device. Flashing green indicates Ethernet activity - Power - USB-EXT-3-LOCAL:
•Power Pack (Included): Input: 100-240 VAC, 50/60 Hz
•Output: 1A at 24 VDC3
•Power Consumption: 24W - Power - USB-EXT-3-REMOTE:
•Power Pack (Included): Input: 100-240 VAC, 50/60 Hz
•Output: 2.71A at 24 VDC3
•Power Consumption: 41W (24W allocated to 4 USB devices) - Environmental:
•Storage: -4° to 158°F (-20° to 70°C)
•Humidity: Operating: 20% to 80% RH (non-condensing)
•Storage: 10% to 90% RH (non-condensing)
•Heat Dissipation: USB-EXT-3-LOCAL: 81.8 BTU/hr
•USB-EXT-3-REMOTE: 139.8 BTU/hr
•Acoustic Noise: None (fanless) - Enclosure:
•Chassis: Black anodized aluminum
•Mounting: Freestanding or surface mountable (optional mounting kit included) - Dimensions:
•Height: 1.34 in. (34 mm)
•Width: 9.15 in. (233 mm)
•Depth: 5.68 in. (144 mm) - WEIGHT:
•USB-EXT-3-LOCAL: 2.23 lb (1.01 kg)
•USB-EXT-3-REMOTE: 2.26 lb (1.03 kg)
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/