DM Lite HDMI Over CATx Transmitter and 3x1 Auto-switcher with 2x HDMI plus VGA and Analog Audio, Surface Mount
Model: HD-TX-301-C-E
- Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
- Enables extension of HDMI® video and audio signals
- Also converts and extends VGA and analog audio signals
- Auto-switches between two HDMI inputs and one VGA input
- Links to the receiver via a single CAT5e (or better) twisted pair cable
Pairs with a DM Lite receiver to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K. Provides auto-switching HDMI (x2), VGA, and stereo analog audio inputs.
Overview:
The HD-TX-301-C-E is a surface-mountable DM Lite transmitter designed to pair with a DM Lite receiver to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230ft (70m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130ft (40m) for UHD and 4K.
The HD-TX-301-C-E includes two HDMI inputs plus one VGA input. The VGA input is accompanied by a stereo analog audio input. Auto-switching between the HDMI and VGA inputs affords plug-and-play simplicity. Manual input selection is also available via individual buttons on the unit. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. It cannot be paired with the HDMI video input however.
The HD-TX-301-C-E is designed to mount on a flat surface beneath a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-TX-301-C-E also supplies power to the connected receiver over the link cable. Alternately, a power pack may be connected to the receiver, which in turn supplies power to the HD-TX-301-C-E over the link cable.
- Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
- Enables extension of HDMI® video and audio signals
- Also converts and extends VGA and analog audio signals
- Auto-switches between two HDMI inputs and one VGA input
- Links to the receiver via a single CAT5e (or better) twisted pair cable
- Supports 4K and UHD at up to 130ft (40m)
- Supports HD 1080p, WUXGA, and 2K at up to 230ft (70m)
- Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
- Handles 3D video and deep color
- Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
- Compatible with HDMI, DVI and dual-mode DisplayPort sources
- Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA
- HDCP 1.4 compliant
- Passes CEC and EDID signals
- Allows control system integration when paired with an HD-RX-201-C-E receiver
- Low-profile surface mount design
- Universal 100-240V power pack included
- Receiver/Transmitter Cable Type - HDMI
- Receiver/Transmitter Format Type - HDMI
- Supported Resolution - 4K (4096x2400)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 230 ft
- Certifications: CE, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 1.25 Amps
- DC Voltage: 24 Volts
- Depth: 5.12 in
- Height: 1.11 in
- Width: 7.70 in
- Product Weight: 1.25 lbs
- Regulatory Compliance: HDCP
- Video:
•Switcher: 3x1 manual or auto-switching, audio-follow-video
•Input Signal Types: HDMI with Deep Color, 3D and 4K (DVI and dual-mode DisplayPort compatible), VGA/RGB (RGBHV, RGBS, RGsB), component (YPbPr)
•Copy Protection: HDCP 1.4 - Audio:
•Input Signal Types: HDMI (dual-mode DisplayPort compatible), analog stereo
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby True HD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD high res, DTS HD master audio, DTS:X, LPCM up to 8 channels
•Analog Formats: stereo 2-channel
•Analog-to-digital conversion: 24-bit 48kHz
•Analog Performance:
•Frequency Response: 20Hz to 20kHz +/-0.5dB
•S/N Ratio: >93dB, 20Hz to 20kHz A-weighted
•THD+N: <0.005% at 1kHz
•Stereo Separation: >80dB - COMMUNICATIONS:
•HDMI: HDCP 1.4, EDID, CEC pass-through
•USB: USB host for one TT-100 series cable caddy (only when paired with an HD-RX-201-C-E receiver)
•DM Lite Link: Proprietary link for connection between one DM Lite TX and RX only - Connectors:
•HDMI 2 - 3 INPUT: (2) HDMI Type A connectors, female
•HDMI digital video/audio inputs (DVI and dual-mode DisplayPort compatible)
•VGA 4 INPUT: (1) HD15 connector, female
•RGB (VGA) or component video input
•Formats: RGBHV, RGBS, RGsB, YPbPr
•AUDIO INPUT: (1) 3.5mm TRS mini phone jack
•Unbalanced stereo line-level audio input
•Maximum Input Level: 2Vrms
•Input Impedance: 44k-ohms
•TO RX: (1) 8-pin RJ45 connector, female, shielded
•Link port for connection to a DM Lite receiver
•24VDC 1.25A: (1) 2.1 x 5.5 mm DC power connector
•24 Volt DC power input
•PW-2412WU power pack included
•SERVICE: (1) USB Type A connector, female
•USB host port for one TT-100 series cable caddy (only when paired with an HD-RX-201-C-E receiver) - Controls and Indicators:
•TO RX: (2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal
•PWR: (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input or from the RX via the DM Lite link, turns amber while booting and green when operating
•AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
•INPUT 2 - 4: (3) Pushbuttons for manual input selection, and (3) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input
•SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup (only when paired with an HD-RX-201-C-E receiver) - Construction:
•Chassis: Metal, black finish, with (2) integral mounting flanges, vented sides
•Mounting: Freestanding, surface mount, or attach to a single rack rail
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/