top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1:2 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
Model: HD-DA2-4KZ-E
- Splits one HDMI® source to two outputs
- Handles 4K60 4:4:4 and HDR video signals [1]
- Fully compatible with HD 1080p, UHD 4K and DCI 4K sources and displays
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X® and uncompressed 7.1 linear PCM audio
Product Info
Tech Specs
Related Products
Documents
The Crestron® HD- DA2-4KZ-E is a simple to use, high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed two separate displays, switchers and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application. No programming or control system is required for operation.
- Splits one HDMI® source to two outputs
- Handles 4K60 4:4:4 and HDR video signals [1]
- Fully compatible with HD 1080p, UHD 4K and DCI 4K sources and displays
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X® and uncompressed 7.1 linear PCM audio
- Selectable handling of HDCP 2.2 or HDCP 1.4
- EDID management options
- Input and output video presence indication
- No programming or control system required
- Thin profile - less than one inch deep
- Surface, shelf or single rack rail mountable
- External 100-240V universal power pack included
- DA Audio Input - HDMI (Embedded)
- DA Audio Output - HDMI (Embedded)
- DA Video Input - DVI
- DA Video Input - HDMI
- DA Video Input - Other
- DA Video Output - DVI
- DA Video Output - HDMI
- DA Video Output - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Mount Type: Freestanding
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 0.75 Amps
- DC Voltage: 24 Volts
- Depth: 4.67 in
- Height: 0.87 in
- Width: 5.73 in
- Regulatory Compliance: CE, IC, FCC
- COMMUNICATIONS:
•USB: USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive
•HDMI: HDCP and EDID (does not pass CEC)
•HDCP: Version Selectable for HDCP 2.2, 1.4 or OFF
HDCP encrypted content is blanked in OFF mode
•EDID Mode: Selectable for DEFAULT or COPY 1ST
The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio
The factory default EDID can be replaced with a custom EDID via USB
Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device
Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID - Connectors:
•INPUT: (1) HDMI Type A connector, female
HDMI digital video/audio input[1]
(DVI and Dual-Mode DisplayPort compatible[2])
•OUTPUT 1-2: (2) HDMI Type A connectors, female
HDMI digital video/audio outputs[1]
(DVI compatible[2])
•SERVICE: (1) USB Type A connector, female
USB 2.0 host port
For firmware update and custom EDID upload via a USB flash drive
•24VDC 0.75A: (1) 2.1 x 5.5 mm DC power connector
24 Volt DC power input
PW-2407WU power pack included - Controls and Indicators:
•PWR: (1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating
•SETUP: (1) Pushbutton and (1) red LED, restores factory settings
•RESET: (1) Recessed pushbutton for hardware reset
•INPUT: (1) Green LED, indicates video signal presence at the HDMI input
•OUTPUT 1 – 2: (2) Green LEDs, each indicates video signal transmission at the corresponding HDMI output
•HDCP (1) 3-position slide switch, selects the HDCP version (OFF, 1.4 or 2.2)
•EDID (1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST)
HD-DA-2
- 1 x 2 HDMI Distribution Amplifier and Audio Converter
HD-DA-2-QUAD
- Quad 1-to-2 HDMI® Distribution Amplifier
HD-DA4-4KZ-E
- 1:4 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
HD-DA8-4KZ-E
- 1:8 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: HD-DA2-4KZ-E
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page