One-touch Cable Retractor for FT2 ELEC Series, USB-C to USB-C, 60 W
Model: FT2A-CBLR-1T-USBC-PWR
- Connectivity for FT2 ELEC Series FlipTops™ cable management systems
- Electrically clutched, spring powered retraction mechanism
- Cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently with the press of a button
- Control system integration enables remote retraction control
- Flexible, low friction flat cable construction
Crestron® One-Touch Cable Retractors (FT2A-CBLR-1T Series) offer a refined cable management solution for use with Crestron FT2 ELEC Series FlipTops™. Each cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently back into the FlipTop™ with the touch of a button. The button on each module is backlit for visibility in a darkened room and is labeled with an international symbol icon indicating the connection type.
Automate one-touch retractors by connecting the retractors in a FlipTop to a control system and a switch or to a DMPS via a single Cresnet cable. Custom programming can trigger all the cables to retract after five minutes of no video being detected.
The retractor mechanism allows for a compact design that is ideal for applications where vertical clearance is limited beneath the table.
Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM® transmitter or similar interface device.1
The pass-through module occupies two module slots within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row but may also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately).
- Connectivity for FT2 ELEC Series FlipTops™ cable management systems
- Electrically clutched, spring powered retraction mechanism
- Cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently with the press of a button
- Control system integration enables remote retraction control
- Flexible, low friction flat cable construction
- Soft-feel sculpted connectors for easy handling
- Backlit international symbol icon identifies the connector type
- Active models support 4K60 4:4:4 digital AV signals
- Support for HDR and HDCP 2.2
- 4K models available to convert from DisplayPort™ to HDMI® connectivity, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, and USB-C® to HDMI connectivity
- Power module available for USB-C® to USB-C (60 W)
- Passive models available for HDMI, VGA, stereo audio, LAN, and USB 2.0
- Requires two module slots at either end of a FlipTop™ module row
- Optional mid-row installation using additional brackets
- Retractor housing snaps onto the side of the FlipTop chassis beneath the table
- Requires only 11-5/8 inch (295 mm) vertical clearance below the table top surface
- Provides a 2.75 or 4.75 ft (0.8 or 1.4 m) long tail below the table
- Cable Management Type - Other
- Spec Sheet available - Yes
- Certifications: CE
- Depth: 2.24 in
- Height: 8.95 in
- Width: 10.30 in
- Color: Black
- Pull-Out Length: Up to 5 ft (1.5 m) above table
- Back End Tail Length: 4.75 ft (1.4 m) beneath table except for models FT2A-CBLR-1T-4K-DP-HD, FT2A-CBLR-1T-4K-MDP-HD, FT2A-CBLR-1T-4K-USBC-HD and FT2A-CBLR-1T-USBC-PWR, which are 2.75 ft (0.8 m)
- Temperature: 32 ° to 113 °F (0 ° to 45 °C)
- Humidity: 10 % to 90 % RH (non-condensing)
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/