Digital Lighting Splitter, 4 Channel, DIN Rail Mount
Model: DIN-GWDL-SPLTR
Part #: 6512087
- Designed exclusively for Crestron Home™ OS
- Provides 4 outputs, each supporting up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands the capability of the DIN-GWDL to support up to 85 Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands wire run maximum 1000 ft (305 m) beyond the DIN-GWDL
- RJ-45 adapters included for quick wiring using standard CAT5 cable
The DIN-GWDL-SPLTR expands the capability and flexibility of the DIN-GWDL by providing four additional outputs for Crestron light fixtures and Crestron compatible third-party light fixtures.
DMX-C
Built on the DMX512 standard, DMX-C offers the speed and reliability of a traditional DMX system with the seamless and consistent user experience of the Crestron Home OS. When connected to a DIN-GWDL, DMX-C lighting fixtures are auto-discovered, auto-addressed, and treated as native Crestron devices with a consistent and intuitive interface.
Supports up to 85 Crestron Light Fixtures and Crestron Compatible Third-Party Fixtures
The DIN-GWDL has two DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures, for a total of 64 directly connected fixtures. Each added DIN-GWDL-SPLTR adds four additional DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures. The DIN-GWDL with a DIN-GWDL-SPLTR can support a total of 85 Crestron light fixtures and Crestron compatible third-party light fixtures.
Fast Commissioning
Connect Crestron light fixtures and Crestron compatible third-party light fixtures quickly with the RJ-45 adapters. Verify the system immediately by testing lighting loads with local controls. Once connected to a Crestron Home processor through a DIN-GWDL, DMX-C allows for lighting loads to be automatically addressed and discovered using the fixture identify tool.
- Designed exclusively for Crestron Home™ OS
- Provides 4 outputs, each supporting up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands the capability of the DIN-GWDL to support up to 85 Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands wire run maximum 1000 ft (305 m) beyond the DIN-GWDL
- RJ-45 adapters included for quick wiring using standard CAT5 cable
- 6U 35 mm DIN rail mountable
- Combiner Type - Splitter/Combiner
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC, IC, CE, and UL
- AC Voltage (Minimum): 4 Volts
- DC Voltage: 48 Volts
- Depth: 1.57 in
- Height: 5.62 in
- Width: 4.23 in
- Product Weight: 0.44 lbs
- Sustainability Rating: IP40
- Supported Fixtures: Crestron light fixtures, Crestron compatible third-party light fixtures
- Communications: DMX-C: Supports discovery, auto-addressing and fixture data; DMX-C communications with Crestron light fixtures and Crestron compatible third-party light fixtures
- Connections:
•9-48VDC: (1) 3-pin 5.18 mm terminal block; 9 - 48VDC, 4 W Max
•DMX IN: (1) 3-pin 5.18 mm terminal bock; Connect to DMX 1 or DMX 2 of DIN-GWDL
•Termination: Terminate the connection to a DIN-GWDL-SPLTR with the 120ohms termination resistor included with the DIN-GWDL-SPLTR between the + and - pins on the terminal block that connects to DMX IN
•OUT 1-4: (4) 3-pin 5.18 mm terminal blocks; Isolated DMX-C outputs; One universe split between four ports; Each output supports up to 32 directly connected devices
•Wiring: Use shielded CAT5 wire or better with a shielded connector, do not connect drain to ground; 24 AWG minimum; RJ-45 to 3-pin adapters included to make CAT5 STP connections; Daisy chain all fixtures, do not create loops; 1,000 ft (305 m) maximum per output
•Termination: Terminate all daisy chain runs with the termination resistor included with the fixtures - Controls and Indicators:
•RESET button: (1) Recessed push button for software reset
•PWR LED: (1) Red LED indicates operating power is supplied
•ACTIVE LED: (1) Red LED indicates device is active
•DMX LED: (1) Red LED indicates DMX activity
•RDM LED: (1) Red LED indicates RDM activity
•ERROR LED: (1) Red LED indicates an error - Humidity: 10% to 90% RH (noncondensing)
- Construction: Mounting: 6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/