top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4 Channel High-Inrush Switch Module - International Version, 230V
Series: CLXI
Model: CLXI-4HSW4
Part #: 6500180
- Each channel is rated for 16A or 1 HP
- Air-gap relays are provided on every channel output
- Provides 4 independent channels of switching for high-inrush loads
- Allows individual circuits to be serviced without disabling entire module
- An override feature allows each channel to be set to preset state during setup
Product Info
Tech Specs
Related Products
Documents
Accessories
High-inrush switch module provides 4 independent channels of switching for high-inrush loads such as motors, HID lighting and fluorescent ballasts, as well as incandescent, low-voltage and neon/cold cathode lighting. Each channel is rated for 16A or 1 HP, with total module rating of 64A when fed from four separate 16A feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling entire module. An override feature allows each channel to be set to preset state during setup. In event that Cresnet communications should be disrupted for any reason, simple contact closure can be used to activate override presets on global or semi-global basis.
- Each channel is rated for 16A or 1 HP
- Air-gap relays are provided on every channel output
- Provides 4 independent channels of switching for high-inrush loads
- Allows individual circuits to be serviced without disabling entire module
- An override feature allows each channel to be set to preset state during setup
- Spec Sheet available - Yes
- Switch Channels: 4
- Load Rating Per Channel: 16 A (1 HP)
- Load Rating Module Total: 64 A (9200W)
- Load Type: Incandescent, Fluorescent, Low-voltage, Neon/Cold Cathode, High-Intensity
- Input Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, brown, line power inputs
- N Input Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, blue, line input neutrals
- N Output Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, blue, channel output neutrals
- Heat Dissipation: 42 BTU/hr (at Maximum Load)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Depth: 3.43 in
- Height: 7.59 in
- Width: 6.92 in
- Product Weight: 3 lbs
- AC Voltage: 230 Volts
CLX-4HSW4
- 4-channel 120V High-inrush Switch Module, 4 Feeds
High-inrush Switch
480 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CLXI-4HSW4
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page