10V 230V 8-channel Dimmer Module, 2 Feeds
Model: CLXI-2DIMFLV8
Part #: 6507764
- 8 channels of 0 to 10V dimming control for fluorescent ballasts and LED drivers
- Two independent 4-channel dimmers in a single module
- Dual or single 230V feed
- Arcless switching
- Air-gap relays on every channel output
The CLXI-2DIMFLV8 provides 8 channels of 0-10V dimming control for fluorescent ballasts and LED drivers.
As part of a complete Crestron® lighting system, the CLXI-2DIMFLV8 lighting control module provides 8 channels of 0-10V dimming control for fluorescent ballasts and LED drivers. The CLXI-2DIMFLV8 is actually composed of two independent 4-channel dimmers in a single module. Each channel is rated for 20A, with a total module rating of 40A when fed from two separate 20A feeds. Air-gap relays are provided on every channel output, allowing individual circuits to be serviced without disabling the entire module.
CLXI Series dimmers are rigorously built for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet® communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.
The CLXI-2DIMFLV8 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-2DIMFLV8 terminal block, sold separately to enable termination of the wiring any time prior to installing the module. CLXI modules are controlled by the CLX-DIN-AP3 or other 3-Series® control system via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).
- 8 channels of 0 to 10V dimming control for fluorescent ballasts and LED drivers
- Two independent 4-channel dimmers in a single module
- Dual or single 230V feed
- Arcless switching
- Air-gap relays on every channel output
- Override preset capability
- Convection cooled
- Occupies 1 module space in a CAEN or CAENIB automation enclosure
- Easy termination using CLTI Series terminal block
- CEC Title 24 2013 Compliant
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL
- Depth: 3.32 in
- Height: 6.92 in
- Width: 6.70 in
- Product Weight: 3.15 lbs
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 220 Volts
- Load Ratings:
•Dimmer Channels: 8
•Per Channel: 20 Amps
•Per Group: Channels 1-4: 20 Amps; Channels 5-8: 20 Amps
•Module Total: 40 Amps
•Load Types: 0-10 Volt fluorescent ballast or LED driver (4-wire) - Connectors on Module:
•Module Interconnect: (2) 5-pin 0.156 inch headers
•Cresnet/Override interconnect ports
•Each connects to a CAEN-BLOCK or the adjacent CLXI-Series module using the interconnect cable provided - Connections via CLTI Terminal Block (sold separately):
•LINE 1 - 2: (2) DIN rail terminal blocks, brown, line power inputs
•DIM 1 - 8: (8) DIN rail terminal blocks, red, channel outputs
•N IN 1 - 2: (2) DIN rail terminal blocks, blue, line input neutrals
•N OUT 1 - 8: (8) DIN rail terminal blocks, blue, channel output neutrals - Buttons:
•SETUP: (1) Pushbutton, for manual channel activation and TSID - LED indicators:
•PWR: (1) Green LED, indicates line power is applied to the LINE 1 terminal
•NET: (1) Yellow LED, indicates communication with the control system
•1 – 8: (8) Red LEDs, each indicates the state of the corresponding channel
•SETUP: (1) Red LED, indicates unit is in setup/manual mode - Enclosure:
•Gray metal, surface mount module with (2) integral mounting flanges
•Occupies 1 module space in any CAEN or CAENIB enclosure
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/