top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 Channel Dimmer Module, 2 Feeds - International Version, 230V
Series: CLXI
Model: CLXI-2DIM2
Part #: 6500178
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
Product Info
Tech Specs
Related Products
Documents
Accessories
Lighting control dimmer module provides 2 independent channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode and dimmable 2-wire fluorescent loads. Each channel is rated for 2300W, with total module rating of 4600W when fed from two separate 16A feeds. Air-gap relays are provided on each channel output allowing an individual circuit to be serviced without disabling entire module. CLXI-series dimmers are rigorously built using 40A triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
- Spec Sheet available - Yes
- Load Rating Dimmer Channels: 2
- Load Rating Per Channel: 10 A (2300W)
- Load Rating Module Total: 20 A (2990W)
- Load Types: Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescen
- Line Connections via CLTI or CLTIBN: (1) DIN rail terminal block, brown, line power input
- DIM Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, red, channel outputs
- Neutral Input Connections via CLTI or CLTIBN: (1) DIN rail terminal block, blue, line input neutral
- Neutral Output Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, blue, channel output neutrals
- Power Requirements: 230Vac, 50/60Hz, single-phase
- Heat Dissipation: 114 BTU/hr (Maximum load)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Depth: 3.43 in
- Height: 7.59 in
- Width: 6.92 in
- Product Weight: 3 lbs
- AC Voltage: 230 Volts
CLX-1DIMU4-HP
- 4-channel 1-feed Universal Dimmer Module, High Power, 120V
DIN-2LEDPWM8
- 2 Channel RGBW LED Dimmer, DIN Rail Mount
Dimmer Module
461 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CLXI-2DIM2
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page