top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
FSE-BASE
Model: FreeSpeak Edge Base Station
- IP Connectivity
- Increased Capability and Flexibility
- Best Audio Quality
- Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
- Supports up to 100 channels
Product Info
Tech Specs
Related Products
Documents
FSE-BASE
The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks.
- IP Connectivity
- Increased Capability and Flexibility
- Best Audio Quality
- Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
- Supports up to 100 channels
- Standard 1 rack unit (RU) device
- High quality 12kHz audio to FS Edge beltpacks
- 2 large full-color touch screen TFT displays
- 4 rotary encoders for gain and menu operation
- Headset connection
- Stage Announce and Prog. Audio cable included
- Functions as PTP Leader Clock
- Wireless 5GHz Edge transceivers and beltpacks
- Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks
- Dante enabled audio devices
- AES67 devices via Dante controller
- 4-wire ports (8 ports RJ45)
- 2-wire ports (4 XLR-3F)
- GPIO (D-type 9 pin)
- LAN – 2 x RJ45, 2 x SFP
- CCM browser-based configuration tool
- Direct management with encoders and display
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Height: 1.72 in
- Length: 13.93 in
- Width: 19 in
- Product Weight: 7.25 lbs
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 160 Watt
- DC Voltage: 12 Volts
- Capacity: Beltpacks per Base Station 16 BPs (FSII or FSE)
- Capacity: Transceivers/Antennas Supported by Base 6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4G
- Headset Microphone Input: Input Type Dynamic /Electret – Selectable
- Headset Microphone Input: Frequency Response Headset Mic – Partyline: 200Hz – 12kHz + 3dBu
- Headset Microphone Input: Frequency Response Headset Mic – Line Out: 200Hz – 20kHz + 3dBu
- Headset Microphone Input: Mic Limiter Threshold -50dBu ±3dB
- Headset Microphone Input: Input Level -60dBu nominal; -25dBu MAX
- Headset Microphone Input: Headset Mic Voltage 5V (Electret selectable)
- Headset Output: Max Output Level before Distortion > 13dBu
- Headset Output: Total Harmonic Distortion (THD) < 0.1% THD at 1kHz
- Headset Output: Headset Mic – Partyline -78dBu (Clear-Com mode)
- Headset Output: Headset Mic – Line Out -60dBu
- Headset Output: Frequency Response Partyline – Headset Out: 200Hz – 10kHz + 3dBu
- Audio/Radio: 4-wire Operating Levels 0dBu Nominal, 18dBu headroom
- Audio/Radio: 2-wire I/O Selectable RTS or Clear-Com mode, Software control
- Partyline I/O: 2W Power On/Off A/B, C/D paired- software controlled
- Partyline I/O: 2W Output Voltage 25 – 28V DC, 560 mA per pair (A/B or C/D)
- Partyline I/O: 2W Frequency Response 200 to 12kHz. ±3dB
- Partyline I/O: 2W Total Harmonic Distortion (THD) < 0.1% THD at 1 kHz
- Relay Contacts or GPIO: Connector Type 2 x DB9
- Relay Contacts or GPIO: Relay Contact Type SPDT
- Relay Contacts or GPIO: Relay Quantity 4
- Relay Contacts or GPIO: Relay Contact Voltage Rating 30V DC
- Relay Contacts or GPIO: Relay Contact Current Rating 1A
- Relay Contacts or GPIO: Input Type Opto-Isolated
- Relay Contacts or GPIO: Input Quantity 2
- Relay Contacts or GPIO: Input Voltage Range 4 – 30 volts DC or AC
- Relay Contacts or GPIO: Input Current >=1.2mA required
CCM for Arcadia and FreeSpeak Edge
- CCM for Arcadia and FreeSpeak Edge
FreeSpeak Edge Beltpack
- FSE-BP50
FreeSpeak Edge Transceiver
- FSE-TCVR-50
FreeSpeak II Beltpacks
- FSII-BP19, FSII-BP19-O2, FSII-BP24, FSII-BP24-O2
FreeSpeak II Transceiver and Splitter
- FSII-TCVR-IP-19 (IPT), FSII-TCVR-19, FSII-TCVR-24, FSII-SPL
FreeSpeak Edge Base Station Product Info
574435 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
Clear-Com
Model: FreeSpeak Edge Base Station
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page