top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
250W Wall-Mount Power Vectors Modular Amplifiers
Model: WV250
- 100-,150-, and 250-watt models, each with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
Product Info
Tech Specs
Documents
Accessories
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models levels: 100W, 150W, and 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.
- 100-,150-, and 250-watt models, each with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED?output level meter monitors the output level of the power amplifier with Peak and Average meter switch
- Adjustable output level limiter with limit indicator
- Tape output available on front of unit
- Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
- Motorized master volume control can be remotely operated
- Bass and treble controls with center detent
- Two-color LED for each channel indicates input active/clipping
- Switch permits user to select either transformercoupled outputs or a direct low-impedance output
- Bass and treble control bypass switch (located in module bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
- 5-position barrier strip, with clamping washers, provides connections for speaker loads
- Master mute function overrides all audio from the mixer section of the amplifier
- Screw terminal for master mute and remote volume control functions
- Each of the 8 module bays has an associated independent volume control
- Remote volume control panel (RVCP) (sold separately)
- Requires flush-mount (Model BBF) or surfacemount (Model BBS) back boxes (sold separately)
- Requires front cover door (WMAD?sold separately)
- Listed to UL Standard 60065 for US and Canada
- Amplifier Type - Other
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 8 ohm
- Sensitivity: 0.40 dBV
- Signal to Noise Ratio: -94 dB
- Height: 21 in
- Width: 14.13 in
- Product Weight: 28 lbs
- Warranty (Length/Type): 3 years
- Number of Watts Per Channel: 250 Watt
- AC Voltage: 120 Volts
- Active Power: 250 Watt
- Current Draw: 5.50 Amps
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CentrePort, MB R4B 0A7
Canada
(204) 786-6521
https://www.inlandav.ca
Contact in regards to this product:
Bogen Communications, Inc.
Model: WV250
Canadian Business-to-Business inquiries only. Please note, we exclusively serve Manitoba, Saskatchewan, Alberta, Northwestern Ontario, Eastern British Columbia, and the Northwest Territories.
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page