120W Gen-2 Nyquist 4-Channel Audio Power Amplifier
Model: NQ-A4120-G2
- 4 dedicated Balanced Line Inputs (both Phoenix plug & RCA)
- Line Inputs can be routed-out over the Nyquist network
- Network-based audio input (paging, audio distribution)
- 4-ohm, 8-ohm, 25V, and 70V outputs
- GUI based DSP control
Bogen's Nyquist based networked audio power amplifiers offer cost-effective performance for permanent installations and commercial sound, and are designed to meet the rigorous requirements of today's sophisticated sound systems. Designed with the commercial sound contractor in mind, they provide unparalleled flexibility and versatility without the need for add-on modules. They offer state-of-the-art, build in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets, which turns the amplifier into a complete audio solution.
These 4-channel amplifiers are available in 60, 120, and 300-watts per channel, each with the same features to provide the power and performance, no matter how large or small the application.
In addition to their extensive flexibility, the Nyquist based networked audio power amplifiers use the latest in Class D amplifier technology and provide unparalleled sound quality, exceptional reliability, and reduced heat output for increased operating efficiency.
- 4 dedicated Balanced Line Inputs (both Phoenix plug & RCA)
- Line Inputs can be routed-out over the Nyquist network
- Network-based audio input (paging, audio distribution)
- 4-ohm, 8-ohm, 25V, and 70V outputs
- GUI based DSP control
- 16-band Graphic Equalizer
- Signal Present and Clip Monitor
- Adjustable High Pass, Low Pass, and Bandpass Filters
- Noise Gate
- Compressor/Limiter
- 7-band Parametric Equalizer
- Switch-selectable 4-Channel (4-ohm/25V), 3-Channel (4-ohm/25V, 8-ohm//70V), or 2-Channel bridged (8-ohm/70V) operation
- Safety: CAN/CSA 62368-1:2014; EN62368-1:2014
- EMC: FCC Part 15 & ICES-003 Class B, EN 55032 Class B
- 1/2 Rack Width - Wall, Rack, or Shelf mountable – 2RU packages
- 19” Rack Mount Kit (NQ-RMK03 or NQ-RMK04; sold separately)
- Amplifier Type - Power Amplifier
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Cooling: Convection
- Depth: 13.48 in
- Height: 3.43 in
- Impedance: 4 ohm
- Indicators: Status and Power LEDs (front) / Network LEDs (rear)
- Line Inputs: Four (4) 10k ohm electronically balanced, 3-pin Phoenix and RCA Connectors
- Width: 8 in
- Networking: Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
- Protection: RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
- Power Handling: 120 Watt
- Product Weight: 6.30 lbs
- Color: Black
- Warranty (Length/Type): 5 Years
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 97 dB
- Total Harmonic Distortion + Noise (THD+N): 0.03 %
- Rack Units (Height): 2
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 5 F
- Current Draw: 6 Amps
- Thermal Emissions (Full Power): 270 BTU/hr
- AC Voltage (Minimum): 85 Volts
- AC Voltage (Maximum): 265 Volts
- Line-In Sensitivity (Gain min./max.): Continuously variable from 2V to 0.1V RMS
- Class of Operation: Class D
Inland AV
422 Lucas Ave
CentrePort, MB R4B 0A7
Canada
(204) 786-6521
https://www.inlandav.ca