300W Gen-2 Nyquist 2-Channel Audio Power Amplifier
Model: NQ-A2300-G2
- 2 dedicated Balanced Line Inputs (both Phoenix plug and RCA)
- Line Inputs can be routed-out over the Nyquist network
- Network-based audio input (paging, audio distribution)
- 4-ohm, 8-ohm, 25V, and 70V outputs
- GUI based DSP control
Bogen’s Nyquist-based networked audio power amplifiers offer cost-effective performance for permanent installations and commercial sound, and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the commercial sound contractor in mind, they provide unparalleled flexibility and versatility without the need for add-on modules. They offer state-of-the-art, built-in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets, which turns the amplifier into a complete audio solution.
These products are certified for residential use!
These 2-channel amplifiers are available in 60, 120, and 300-watt models, each with the same features to provide power and performance, no matter how large or small the application.
In addition to their extensive flexibility, the Nyquist Networked Power Amplifiers use the latest in Class D amplifier technology and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating efficiency.
- 2 dedicated Balanced Line Inputs (both Phoenix plug and RCA)
- Line Inputs can be routed-out over the Nyquist network
- Network-based audio input (paging, audio distribution)
- 4-ohm, 8-ohm, 25V, and 70V outputs
- GUI based DSP control
- 16-band Graphic Equalizer
- Signal Present and Clip Monitor
- Adjustable High Pass, Low Pass, and Bandpass Filters
- Noise Gate
- Compressor/Limiter
- 7-band Parametric Equalizer
- Switch selectable 2-Channel (4-ohm/25V) or 1-Channel bridged (8-ohm/70V) operation
- Safety: CAN/CSA C22.2 No. 62368-1:2014; UL62368-1:2014; EN62368-1:2014
- EMC: FCC Part 15b Class B, ICES-003 (B), Issue 6: 2016; EN 55032 Class B:2015; EN 55035:2017
- 1/2 Rack Width - Wall, Rack, or Shelf mountable – 1RU and 2RU packages
- 19” Rack Mount Kit (NQ-RMK03; sold separately)
- Amplifier Type - Power Amplifier
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Cooling: Convection
- Depth: 13.48 in
- Height: 1.70 in
- Impedance: 4 ohm
- Indicators: Status and Power LEDs (front) / Network LEDs (rear)
- Line Inputs: 2 10k ohm electronically balanced, 2 3-pin Phoenix and 2 Balanced RCA Connectors
- Output: 4-pin “touch proof” Phoenix Plug/Header
- Power: 10A Line Cord C14 IEC Inlet
- Width: 8 in
- Networking: Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
- Protection: RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
- Power Handling: 300 Watt
- Mounting Width: 0.50 in
- Product Weight: 6.40 lbs
- INPUT: 2 Balanced 3-pin Phoenix Plug/Header, 2 Balanced RCA Connector, RJ45, USB 2.0 Type A
- Color: Black
- Warranty (Length/Type): 5 Years
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 97 dB
- Number of Channels: 2
- Total Harmonic Distortion + Noise (THD+N): 0.03 %
- Number of Watts Per Channel: 600 Watt
- Rack Units (Height): 1
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 5 F
- Current Draw: 6 Amps
- Thermal Emissions (Full Power): 225 BTU/hr
- AC Voltage (Minimum): 85 Volts
- AC Voltage (Maximum): 265 Volts
- Line-In Sensitivity (Gain min./max.): Continuously variable from 2V to 0.1V RMS
- Class of Operation: Class D
Inland AV
422 Lucas Ave
CentrePort, MB R4B 0A7
Canada
(204) 786-6521
https://www.inlandav.ca