Community R.35-3896-EN - 8" Three-way Triaxial Ultra-compact Horn-loaded Loudspeaker
Series: R SERIES
Model: R.35-3896-EN
Part #: 1240.900
- Multisource Waveguide™
- Ultra-compact size, high output
- Premium music applications
The R.35-3896-EN is an EN54-24 certified, triaxial 8-inch Carbon Ring Cone loudspeaker featuring Community's exclusive MultiSource Waveguide™ technology which adeptly integrates the output from dual midrange compression drivers and a 1-inch exit HF compression driver into a single coherent source. Fully passive, it is voiced for flat musical reproduction without EQ and delivers class-leading SPL levels for a loudspeaker of its size. The R.35-3896-EN meets the need for a high performance compact loudspeaker for fill and supplementary areas in larger venues and for smaller venues wanting to conform to EN54 standards. With outstanding voice and music quality, the R.35-3896-EN is equally suitable for indoor and outdoor use in a wide variety of applications, including background and foreground music and announcement systems in corporate A/V, leisure centers, swimming pools, theaters, night clubs, shopping malls, stadiums, cruise ships, theme parks and factories. The high output, 3-inch voice coil, 8-inch carbon ring cone LF driver features a flange-less frame design that permits a cone area nearly equivalent to a typical 10-inch driver, resulting in high sensitivity and increased LF extension. The low LF/MR passive crossover point results in improved midrange pattern control and elimination of horn coloration in the LF response. With a built-in autoformer, the R.35-3896-EN is certified for use in 100V distributed system applications.
- Multisource Waveguide™
- Ultra-compact size, high output
- Premium music applications
- Transformer Option - Yes
- Warranty - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Depth: 13.50 in
- Height: 11 in
- Impedance: 8 ohm
- Sensitivity: 94 dB
- Width: 13 in
- Power Handling: 400 Watt
- 70V Taps: 200W, 100W, 50W, 25W Watt
- Warranty (Length/Type): 5 Years
- Construction: ABS Plastic
- Minimum Frequency Response (Bandwidth): 95 Hz
- Maximum Frequency Response (Bandwidth): 19 kHz
- Maximum Frequency Response (Bandwidth): 19000 Hz
- Minimum Frequency Response (Bandwidth): 0.10 kHz
- 100V Taps: 200W, 100W, 50W Watt
- Finish: Light Grey
- Color: Light Grey
- Sustainability Rating: IP55W
- Sensitivity:
•Music: 1W/1m- 98dB; 1W/4m-82.4dB
•Speech: 1W/1m- 100dB - Operating Mode: Passive, Low impedance or 70V/100V
- Operating Environment: All Conditions, suitable for continuous outdoor direct exposure
- Nominal Beamwidth: 90° x 60°
- Nominal Maximum SPL (Whole Space):
•Continuous Music: 124dB @1m6)
•Continuous Music: 103.4dB @4m5,7
•Peak Music: 130dB @1m6
•Continuous Speech: 126dB @1m6
•Peak Speech: 132dB @1m6 - Triaxial Transducers: LF 1 x 8" Carbon ring hydrophobically-treated cone, 3" VC, MF 2 x 2.35" MultiSource Waveguide™ compression, HF 1 x 1" exit compression
- Coverage (-6dB) Horiz/Vert per EN54-24:
•500Hz: 146 / 180
•1 kHz: 110 / 110
•2 kHz: 88 / 103
•4 kHz: 81 / 46 - Declared values of SPL 1/3 Oct band CPB, 1W/4m, per EN54-24 (Hz:dB): 500: 69.3, 630: 69.7, 800: 69.2, 1000: 69.2, 1250: 70.5, 1600: 69.1, 2000: 67.5, 2500: 70.8,3150: 69.4, 4000: 71.7
- Required Accessories: Digital Signal Processor; 80Hz 24dB / Octave High Pass Filter
- Input Connection: NL4 Speakon-type connector for low impedance operation only; and 7-position terminal strip for low impedance or constant voltage operation
- Mounting/Suspension Points: Two M8 rigging points, zinc-rich epoxy dual-layer powder-coated yoke, included integral safety cable mounting point
- Input Panel Weather Cover: Color-matched ABS plastic with 13.5mm ID gland nut installed in 21mm knockout
- Environmental: IP55W per IEC 60529 (with a recommended 5° down-tilt); designed to meet MIL-STD-810G standard
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/