Powerful Compression Horn Loudspeaker, 100V/20W and 8 ohms/30W, ABS plastic, Cool Grey
Model: H20-G Grey 100v
- High output voice paging and signal horn
- Rugged construction for industrial applications
- IP66 Indoor/Outdoor ready
- Permanently attached and water-sealed input wire
- Externally accessible 6-position tap switch
The H20 is a powerful weatherproof industrial horn loudspeaker with compression driver. It offers high sound pressure, which makes this loudspeaker ideally suited for speech and the reproduction of alarm signals in a noisy environment. The H20 is ideal for long-distance and outdoor use.
The stainless-steel brackets and rust-free bolts and screws make this horn suited for indoor and outdoor use. The bracket also makes it possible to rotate the speaker over a range of more than 180 degrees. Because this horn speaker is constructed in high impact ABS, it can withstand even the harshest of elements.
The H20 loudspeaker is equipped with a high quality 70/100-volt transformer with several power taps and can also be used in 8ohm systems. Our technology avoids any overload of your amplifier by controlling the impedance with the unique IMC protection device inside.
- High output voice paging and signal horn
- Rugged construction for industrial applications
- IP66 Indoor/Outdoor ready
- Permanently attached and water-sealed input wire
- Externally accessible 6-position tap switch
- Warranty - Yes
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 1.40 in
- Maximum Frequency Response (Bandwidth): 6.70 kHz
- Maximum Frequency Response (Bandwidth): 6700 Hz
- Minimum Frequency Response (Bandwidth): 490 Hz
- Minimum Frequency Response (Bandwidth): 0.49 kHz
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 130 dB
- Power Handling: 20 Watt
- Sensitivity: 107 dB
- Depth: 9.06 in
- Height: 7.88 in
- Width: 7.88 in
- Product Weight: 3.15 lbs
- Color: Cool Grey
- Regulatory Compliance: IEC
- Sustainability Rating: IP66
- Splay Angle Maximums: 85 degrees
- Splay Angle Minimum: 85 degrees
- 100V Taps: 20 W, 10 W, 5 W, 2.5 W Watt
- 70V Taps: 20 W, 10 W, 5 W, 2.5 W, 1.25 W Watt
- Coverage Horizontal: 85 degrees
- Coverage Vertical: 85 degrees
- DC Voltage: 12.60 Volts
- Protection: Internal DC-blocking capacitor
- Required Accessories: 425 Hz, 6 dB / oct. Butterworth high pass filter; DSP preset
- Recommended amplifiers: 20 W - 40 W, 8 ohms (13 V - 18 V)
- Input Connection: 2 x 0.3 mm2 conductor 1 m (39.3") cable
- Controls: Wattage / low impedance selector switch
- Mounting Provisions: U-Bracket
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/