top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
PoE+ Indoor Wall Mount IP Speaker with LED Display, LED Flashers and Talkback Microphone
Model: IP-SDMFLED
- Network Features
- Dynamic or Static IP Address
- IEEE802.3 10/100Base-T Ethernet
- IEEE 802.1q Tagging
- IEEE 802.11AT Compliant
Product Info
Tech Specs
Documents
AtlasIED IPX Series IP-SDMFLED indoor wall mount IP speaker with LED display and flasher leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED IP-SDMFLED registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
- Network Features
- Dynamic or Static IP Address
- IEEE802.3 10/100Base-T Ethernet
- IEEE 802.1q Tagging
- IEEE 802.11AT Compliant
- VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.722 Wideband Audio (64 kbit/s)
- Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
- Auto Registration: SLP for InformaCast or DHCP Option 72 for Revolution or GCK
- Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
- Audio Features
- Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
- Aux Audio Line-In Unbalanced (2.8Vpp 10K)
- Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
- Additional Features
- 2 General Purpose Inputs
- PoE+Enabled
- 1 General Purpose Output (2A at 30 VDC)
- Phone/Night Loud Ringer
- External Power Supply Option
- Speaker Type: Coaxial
- Speaker Size: 8" LF, 1" HF
- Frequency Response: 86Hz - 15.5kHz
- Dispersion: 105? (2kHz Octave Band, -6dB Points)
- Sensitivity: 98dB SPL Average
- Power Rating: 12-Watts Max (802.3AF) / 25-Watts Max (802.3AT)
- THD: <0.2%
- Grille: Powder Coated Steel
- connector type: RJ-45
Wall Mount IP Speaker
188548 kb
- Instructions
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
AtlasIED
Model: IP-SDMFLED
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page