top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Professional Power Amplifier
Series: VLP
Model: VLP 1500
- Thru will allow user to daisy-chain one amplifiers signal input into another amplifier
- Applying or lifting ground switch will change level for background noise and hum
- Gain controls are located on front panel and are calibrated in 2dB of attenuation from full gain
- Each channel has five LEDS, two LEDs indicate signal level activity, two green LEDs, one yellow LED indicates signal clipping
- Thermal protection, dual variable speed fans on VLP series amplifier provide adequate cooling
Product Info
Tech Specs
Documents
VLP series amplifier allows to use two types of input connector per channel, XLRjack for balanced connections and 1/4-inch female jack that will accept balanced and unbalanced connectors. Use these connections to connect output signal from mixer, cross-over or EQ to VLP Series amplifier. Balanced connection is recommended for cable runs longer that 20ft. When constructing own XLR cables follow pin configuration describe below for proper connections. For cable runs shorter than 20ft may choose the 1/4-inch unbalanced input option. 1/4-inch unbalanced input option may be more convenient for most users due to abundant supply of prefabricated cables available at local audio dealer.
- Thru will allow user to daisy-chain one amplifiers signal input into another amplifier
- Applying or lifting ground switch will change level for background noise and hum
- Gain controls are located on front panel and are calibrated in 2dB of attenuation from full gain
- Each channel has five LEDS, two LEDs indicate signal level activity, two green LEDs, one yellow LED indicates signal clipping
- Thermal protection, dual variable speed fans on VLP series amplifier provide adequate cooling
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Slew Rate: 15 V/uS
- Damping Factor: 300 (8 Ohms)
- Impedance: 20 (balanced)/10 (Unbalanced) kohms
- Output Power: 750W RMS per channel (4 ohms, 1kHz, 0.1% THD), 500W RMS per channel (8 ohms, 1kHz, 1% THD)
- Output Power (Bridged Mode, mono): 1500W RMS per channel (8 ohms, 1kHz, 1% THD)
- Power Supply: 120Vac, 60Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 20,000 ohm
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- Depth: 14 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 42 lbs
- Warranty (Length/Type): 1-year Limited
- Number of Watts Per Channel: 1500 Watt
Power Amplifier
5860 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Inland AV
close
Inland AV
422 Lucas Ave
CenterPort, MB R4B 0A7
Canada
(204) 786-6521
https://inlandav.ca/
Contact in regards to this product:
American Audio
Model: VLP 1500
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page